Jura IMPRESSA J7 User Manual

18
2 Preparing and using for the first time
Place a receptacle under the coffee spout.
c T Press the maintenance button.
RINSING, the machine rinses. The operation stops auto-
matically.
READY appears on the display. Your IMPRESSA is ready for
use.
Your IMPRESSA no longer has to be descaled if you are using CLARIS
Blue filter cartridges.
You can also try out the ‘Inserting the filter’ operation online.
Visit the Knowledge Builder at www.jura.com.
Perform the ‘Inserting the filter’ operation without interrup-
tions. This will ensure that your IMPRESSA always produces its
best.
Precondition:
READY is displayed.
k T Keep the Rotary Switch pressed until
RINSE appears on
the display.
g T Turn the Rotary Switch until
FILTER - is displayed.
k T Press the Rotary Switch to enter the programme item.
NO -
g T Turn the Rotary Switch until YES w is displayed.
k T Press the Rotary Switch to confirm the setting.
OK appears briefly on the display to confirm the setting.
INSERT, the maintenance button c lights up.
Remove the filter cartridge extension from the Welcome Pack.
Fit the extension on top of an original CLARIS Blue filter
cartridge.
Remove and empty the water tank.
Lift the cartridge holder and insert the filter cartridge into
the water tank, exerting slight pressure.
Close the cartridge holder. It will click into place audibly.
After two months, the filter will cease to work. You can check
the elapsed time by referring to the date plate on the cartridge
holder in the water tank.
T
@
E
T
T
T
T
T
E
Inserting and
activating the filter
Inserting and
activating the filter

Jura IMPRESSA J7 Specifications

General

Type	Coffee
Dimensions (WxDxH)	285 x 433 x 342 mm
Cup warmer	Yes
Product type	Espresso machine
Water tank capacity	2.1 L
Coffee beans capacity	250 g
Maximum operating pressure	15 bar
Cord length	1.1 m
Product color	Black
AC input voltage	230 V
Multi beverage	No

Weight and Dimensions

Weight	10750 g