JVC 0706TNH-II-IM

75
Button Functions
i.LINK Menu
i.LINK has two menus - Controller and Device.
By connecting a D-VHS VCR with an i.LINK cable, you can set the timer easily.
Notes:
• The i.LINK/Timer function will only work when you are receiving digital programming only.
• As for the connection of a D-VHS VCR with the i.LINK cable, see page 22.
• When operating the i.LINK, don't insert or disconnect the i.LINK cable.
Controller
You can operate a D-VHS VCR connected with an i.LINK cable by using this controller.
Notes:
• If the i.LINK is not connected, the Controller OSD will not appear. The OSD of device on
page 76 will appear.
• Some controller operations may differ from your D-VHS VCR operations.
Press the i.LINK MENU button
√® π† To select the key you want to operate
Press the OK button
i.LINK
D-VHS1
Device
STOP 00:00:00
POWER
Controller
LCT2128-001B-A English.indd 75LCT2128-001B-A English.indd 75 7/6/06 9:37:37 AM7/6/06 9:37:37 AM