JVC AV-20320 - Button Functions; Menu; Exit; Display

Button Functions
37
The Display screen shows the current status of timers and inputs.
Press the DISPLAY button
• The channel or AV input (Channel 07)
• The current time (12:20 pm)
• Sleep Timer status/minutes remaining (The Sleep Timer is off)
• On/Off Timer status (Set to turn on everyday at 7:00 PM, off at 10:00 PM)
• Each Press of the D
ISPLAY button changes the display mode:
Display - Full screen shown above
Time - Shows the current time only
Channel - Shows the current channel
Off - Turns Display off
• You may also turn off the Display at any step by pressing E
XIT.
07
NOW 12:20 PM
SLEEP TIMER OFF
ON/OFF TIMER EVERYDAY
ON TIME 7:00 PM
OFF TIME 10:00 PM
Display Time Channel
Off
The MENU button allows you to access JVC’s onscreen menu system. Press M
ENU to activate
the onscreen menu system.
• See individual topics (like “Set Video Status”) for specific information on using menus.
Press the EXIT button to leave a menu screen.
Menu
Exit
Display
• Please note that if the Clock, Sleep Timer or On/Off Timer are not set, the Display screen will
show: "CLOCK NOT SET", "SLEEP TIMER OFF", and "ON/OFF TIMER OFF" respectively.
NOTE:
FV5 English 3/12/02 2:49 PM Page 37