JVC BD-X201M User Manual

72
CLOCK ADJUST MENU Screen
The following table identifies and describes the parameters that may be set using the CLOCK ADJUST MENU screen.
Top half : Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ] : Default setting
Parameter Possible settings Description
DATE
dATE
TIME
TIME
MENU
MENU
This parameter is used to set the date.
This parameter is used to set the time.
This button is used to return to the Setup Menu screen.
For more details regarding date and
time settings, refer to page 24.
NETWORK MENU Screen
The following table identifies and describes the parameters that may be set using the NETWORK MENU screen.
Top half : Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ] : Default setting
Parameter Possible settings Description
HOST NAME [bdx201m]
CANCEL
HoST
IP ADDRESS [192.168.0.2]
IP Add [192]
SUBNET MASK [255.255.255.0]
SUbNET [255]
DEFAULT [192.168.0.254]
GATEWAY
GATE [192]
MENU
MENU
This parameter is used to enter this DVD recorder’s network name using a keyboard.
The name cannot be input from this DVD recorder.
(Names may be up to 20 characters in length. Alphanumerical characters and hyphen
(-))
CANCEL : Cancel setting the host name.
This parameter is used to set the IP address. It is important to ensure that no two
devices on a single network share the same IP address.
This parameter is used to set the subnet mask. Connected DVD recorders should
have the same network setting.
This parameter is used to set the gateway address. Connected DVD recorders should
have the same address.
This button is used to return to the Setup Menu screen.
* The IP ADDRESS SETTING item cannot be selected.
Setup Menu
11_BD-X201M(58_75).p65 05.1.14, 4:37 PM72

JVC BD-X201M Specifications

General

Brand	JVC
Model	BD-X201M
Category	DVD Recorder
Language	English