JVC D-ILA DLA-HD1-BC User Manual

(No.PA023)1-23
5.2.2 Mearsures during abnormality
In event of the following be sure to disconnect the power cord from the AC outlet, and reset the projector mode.
Error code 01
Lamp dose not light
Check the DC voltage of
LAMP BALLAST UNIT
POWER PWB and input
voltage defective
NG
NG
OK
OK
Check the LAMP RETURN
signal
NG
NG
OK
OK
NG
NG
OK
DD PWB or FAN PWB defective
LAMP BALLAST UNIT
or LAMP defective
LAMP BALLAST UNIT or
LAMP defective
Check the LAMP ON signal
Error code 06 Lamp extinguishes
during projection
POWER PWB and input
voltage defective
DD PWB or FAN PWB
defective
Check the LAMP RETURN
signal
Check the LAMP ON signal
Check the DC voltage of
LAMP BALLAST UNIT

JVC D-ILA DLA-HD1-BC Specifications

General

Brand	JVC
Model	D-ILA DLA-HD1-BC
Category	Projector
Language	English