To Next PageTo Next Page
Need help?Do you have a question about the JVC DLA-NP5 and is the answer not in the manual?
General| Brightness | 1, 900 Lumens |
|---|---|
| HDR | HDR10, HLG |
| Lens Shift | Vertical: ±80%, Horizontal: ±34% |
| Light Source | Lamp |
| Lamp Life | 4, 500 hours (Normal Mode) |
| 3D Support | Yes |
| Resolution | 4096 x 2160 |
| Contrast Ratio | 40, 000:1 |
| Technology | D-ILA |
| Inputs | 2x HDMI, 1x USB, 1x RS-232C, 1x LAN |
| Zoom | 2x |
| Lamp Type | NSH 265W |
| Weight | 19.6 kg |
Guidelines on operating, cleaning, and environmental placement.
Precautions regarding plugs, grounding, and cord management.
Safety measures for maintenance, parts replacement, and service.
Safety considerations for mounting, ventilation, and unit placement.
Health precautions for 3D viewing and laser radiation hazards.
Information regarding laser product classification and label locations.
Detailed precautions to avoid laser exposure.
Specific warning text regarding exposure near the aperture.
Reinforces the importance of not staring into the laser beam.
Warnings about laser hazards and requirements for installation location.
Safety guidelines for handling and installing the projector.
Safety precautions and torque settings for ceiling mounting.
Using lens shift for horizontal and vertical image positioning.
Setting up a network connection for external control.
Connecting for serial control via RS-232C.
Precautions for connecting the power cord to prevent hazards.
Adjusting lens parameters for optimal projection.
Fine-tuning 3D images for parallax and crosstalk.
Choosing picture modes based on content type.
Feature for real-time adjustment of HDR tone mapping.
Automatically adjusts tone mapping based on viewing environment.
Options for automatic or manual tone mapping adjustments.
Modifying projected image output values relative to video signal input.
Reducing input lag for gaming and other low-latency content.
Comprehensive listing of all menu options and their page references.
Settings related to input signals and their properties.
Options for managing and saving installation configurations.
Choosing the optimal picture mode for viewing.
Selecting and fine-tuning color profiles.
Configuring color temperature settings based on picture mode.
Configuring content analysis for HDR processing.
Adjusting gamma and tone mapping based on picture mode.
Automatic brightness adjustment based on screen size and state.
Adjusting overall brightness during tone mapping.
HDR level settings based on the selected picture mode.
Setting base brightness for auto correction.
Detailed adjustment of lens parameters.
Performing pixel-level and fine-tuning adjustments.
Correcting image distortion caused by angled projection.
Optimizing projected image size based on input aspect ratio.
Configuring a password for LAN connection.
Step-by-step instructions for replacing the lamp unit.
Steps to reset the lamp usage timer via the menu.
Instructions for cleaning and replacing the projector's sponge filter.
Steps to resolve issues related to power supply.
Resolving issues where the projector shuts down automatically.
Steps to resolve when no video image is displayed.
Troubleshooting issues with 3D image display.
Resolving unnatural 3D images and color problems.
Troubleshooting missing image sections and remote control problems.
Resolving issues related to connecting to the LAN terminal.
Actions to take when the lamp replacement warning appears.
Technical details for RS-232C interface communication.
Steps for establishing a TCP connection for network control.
Format and structure of commands sent to the projector.
List of supported video signal formats and resolutions.
Supported 3D signal formats (Frame Packing, Side-by-side).
Supported PC resolutions, timings, and dot clock frequencies.
Detailed breakdown of warning indicators and corrective actions.
Further details on warning indicators and their troubleshooting steps.
