JVC DLA-NP5 User Manual

Remote Code
For changing the remote control code.
Setting Description
A Change the remote control code from “B” to “A”.
B Change the remote control code from “A” to “B”.
0
You need to configure the remote control according to the settings of this unit.
On the
remote control unit, press the [MENU] button for three seconds or longer while pressing and hold the [BACK]
button to switch the code.
0
The backlight of the remote control blinks 3 times: change the remote control code to “A”
0
The backlight of the remote control blinks 2 times: change the remote control code to “B”
0
If the setting differs between this unit and the remote control, the “STANDBY/ON” indicator blinks in green when
receiving the remote control code.
LIGHT
STANDBY/ON
WARNING
ANDBY/O
(Green)
88
Adjust/Set

JVC DLA-NP5 Specifications

General

Brightness	1, 900 Lumens
HDR	HDR10, HLG
Lens Shift	Vertical: ±80%, Horizontal: ±34%
Light Source	Lamp
Lamp Life	4, 500 hours (Normal Mode)
3D Support	Yes
Resolution	4096 x 2160
Contrast Ratio	40, 000:1
Technology	D-ILA
Inputs	2x HDMI, 1x USB, 1x RS-232C, 1x LAN
Zoom	2x
Lamp Type	NSH 265W
Weight	19.6 kg