Clear Motion Drive (C.M.D.)
Optimal interpolation according to the content is made possible with the new high-definition image interpolation
technique.
For some scenes, interpolation may cause distortion in the image. In this case, set to “Off”.
Intermediate Frame GenerationIntermediate Frame Generation
Interpolation Enabled
Original Image
1
Press the [C.M.D.] button, use the [JK] keys to select a
setting, followed by pressing [OK]
0
You can also perform the setting by pressing the [MENU] button to display
the menu followed by selecting “Picture Adjust”"“Motion Control”"“Clear
Motion Drive”.
Setting Description
Off Interpolation is not performed.
Low Improves motion lag for movie type images.
High Improves motion lag fast moving sports type images.
Inverse Telecine 60i/60p video images such as those of TVs and DVDs.
Suitable for
original images that are 24-frame film sources.
0
Does not function for 24p video images.
* C.M.D. is the abbreviation for Clear Motion Drive.
* This item cannot be set when “Low Latency” is set to “On”.
*
This item cannot be configured when the input signal is 100Hz/120Hz.
Motion Enhance
You can reduce motion blur with this function enhancing the response of D-ILA image devices.
If the image outline is unnatural, set this item to “Off”.
1
Press the [MENU] button to display the menu and select “Picture Adjust”"“Motion
Control”"“Motion Enhance”
Setting Description
Off Does not perform correction.
Low Decreases jitter for fast moving video.
High Further reduces image blurring than “Low”.
60
Adjust/Set
To Next Page
Loading...
Need help?
General
