To Next Page

To Previous Page

Mask

For hiding the peripheral area of the image with a mask (black strip).

Setting Description

Off Not masked.

On Hides the ranges specified in “Top”, “Bottom”, “Left” and “Right” by masking (with

black strips).

Mask: black strip around the

eri

her

Off

“Top” / “Bottom” / “Left” / “Right”

For specifying the ranges to hide by masking (with black strips).

Setting range: 0 to 220

Anamorphic

Configure this setting when an anamorphic lens is used.

Setting Description

Off Projects the 2.35:1 image without any changes.

A Projects the 2.35:1 image with it stretched in the vertical direction only using a 3840

pixel width.

B Projects the 16:9 image with it compressed in the horizontal direction only.

C This is a mode used exclusively for the DCR lens of Panamorph.

Projects the image by stretching 2.35:1 video images in the vertical direction and

enlarging them in the horizontal direction to the maximum panel width of 4096

pixels.

This is configured to “A” in the 3D mode.

D This is a mode used exclusively for the DCR lens of Panamorph.

Projects the 16:9 image with it compressed in the horizontal direction only.

Adjust/Set

Questions and Answers:

Need help?

Do you have a question about the JVC DLA-NP5 and is the answer not in the manual?

JVC DLA-NP5 Specifications

General