Why is my JVC Projector projected image dark?
If the projected image on your JVC Projector is dark, check the lamp time in the “Information” menu to see if the lamp is near exhaustion and needs replacement. Also, verify that the aperture is not closed by increasing the value of the “Aperture” setting, and ensure that “Lamp Power” is not set to “Low” by setting it to “High.”
What to do if video images are missing on my JVC DLA-N5 Projector?
If video images are missing on your JVC Projector, check if screen mask has been configured and set “Mask” to “Off.”
Why does the 3D video image look unnatural on my JVC DLA-N5 Projector?
If the 3D video image looks unnatural on your JVC Projector due to overlapping video images, it could be due to the crosstalk phenomenon. Adjust “Crosstalk Cancel” accordingly. This often occurs when there are drastic changes in brightness, so set “Lamp Power” to “High.”
What to do if power is not supplied to my JVC DLA-N5?
If power is not being supplied to your JVC Projector: * Ensure the power cord is firmly inserted. * If in Standby mode, remove the power plug, close the lamp cover properly, and reinsert the plug. * If in Cool-down mode, wait for it to exit, then turn the power on again. * If in Eco mode, press the A button on the projector or remote, wait for the “STANDBY/ON” indicator to light up red, then press the C [ON] button.
Why does my JVC Projector show a video image horizontally or vertically extended?
If the video image on your JVC Projector appears horizontally or vertically extended, ensure that “3D Format” is set to “Auto.” Also, verify that “Anamorphic” is set to “Off.”
How to resolve if 3D images do not appear on JVC Projector?
If 3D images do not appear on your JVC Projector: * If you see two images displayed side by side, set “3D Format” to “Side by Side.” * If using an intermediate device, connect the source device directly to the projector. * Use an HDMI-certified high-speed cable, as short as possible. * If using PK-AG3 3D Glasses, turn them on manually and ensure they are charged. * Position the 3D Glasses and 3D Synchro Emitter at an appropriate distance from each other.
How to fix a fuzzy video image on my JVC DLA-N5 Projector?
To fix a fuzzy video image on your JVC Projector, first adjust the focus. If that doesn't work, ensure the unit is set at the correct distance from the screen.
What causes the video image to flicker on my JVC Projector?
Video image flicker on your JVC Projector can be caused by a few things. If you see horizontally-extended, overlapping video images, set “3D Format” to “Auto.” If you're viewing under fluorescent light, it may be interfering with the 3D glasses; try turning off the fluorescent light. If “Aperture” is set to “Auto 1” or “Auto 2”, set it to “Manual.”
How to resolve unnatural colors on my JVC DLA-N5 Projector?
To resolve unnatural colors on your JVC Projector, ensure that the color space of the input signal is correctly set to match the projector setting. Adjust the “Color” and “Tint” settings accordingly. Also, make sure that the AV device or PC is properly connected.
What to do if the video image does not appear on my JVC DLA-N5 Projector?
If the JVC Projector isn't displaying a video image, first ensure that the correct external input is selected. Also, check that the AV device or PC is turned on, properly connected, and outputting the correct signals. Verify that you're using an HDMI-certified high-speed cable, and if using an intermediate device like an AV amplifier, try changing the power-on sequence. If an older source device is connected, try adjusting its resolution or connecting to the HDMI 2 terminal and setting “HDMI 2 EDID” to “B.”
To Next Page
General
