JVC DLA-RS35 - User Manual

Questions and Answers

J
Jessica CunninghamAug 16, 2025
What to do if the video image does not appear on my JVC Projector?
- E
  Erica SchaeferAug 16, 2025
  If the video image does not appear on your JVC Projector, first, ensure that the correct external input is selected. Next, verify that the AV device is properly connected and powered on, and that it is outputting the correct signals. Also, check the input terminal settings in the setting menu, setting “COMP.” and “HDMI” according to the input signal. Finally, check if the video image is temporarily hidden and press the [HIDE] button to display the video image again.
S
swuAug 18, 2025
How to troubleshoot power issues with my JVC DLA-RS35 Projector?
- A
  alvarezrichardAug 19, 2025
  If your JVC Projector's power is not supplied, make sure the power cord is firmly inserted. If it is, check whether the lamp cover is properly shut; if not, remove the power plug when the unit is in standby mode and close the lamp cover properly, then re-insert the plug. Also, ensure the projector is not in Cool Down mode; if it is, wait until the mode is complete, then turn the power on again.
B
brian23Aug 21, 2025
Why does my JVC DLA-RS35 stop working after a few minutes?
- D
  Darius WattsAug 21, 2025
  If your JVC Projector unit works when power is turned on but stops abruptly after a few minutes, it might be due to blocked air inlets or exhaust vents. Remove the power plug when the unit is in standby mode and clear any obstructions. Also, a dirty filter can cause this issue, so try cleaning the filter.
N
Nathan RamosAug 25, 2025
Why is my JVC DLA-RS35 remote control not working?
- M
  Mark PrattAug 26, 2025
  If the remote control for your JVC Projector isn't working, first check if the batteries are installed correctly, matching the polarities (+ and -). If they are, try replacing them with new batteries. Also, make sure there are no obstructions between the remote control and the remote sensor, and ensure you are holding the remote control close enough to the sensor.
N
Nicole GriffinAug 28, 2025
Why is the projected image from my JVC DLA-RS35 dark?
- S
  shanehernandezAug 28, 2025
  If the projected image from your JVC Projector appears dark, it could be that the lamp is nearing exhaustion. Check the lamp time in the information menu and consider preparing or replacing the lamp unit as soon as possible.
H
Harold HuffAug 31, 2025
Why is the video image on my JVC Projector fuzzy?
- A
  Andrew RamosAug 31, 2025
  If the video image from your JVC Projector is fuzzy, first adjust the focus. If the issue persists, ensure the unit is placed at the correct distance from the screen.
C
christopherkellySep 3, 2025
Why does my JVC DLA-RS35 power cut off suddenly?
- J
  Jordan NelsonSep 3, 2025
  If the power of your JVC Projector is being cut off suddenly, check if the “Off Timer” is activated in the setting menu. If it is, set it to “Off”.
J
Justin AndersonSep 6, 2025
Why does the color on my JVC Projector not appear correctly?
- H
  hutchinsonrachelSep 6, 2025
  If the colors on your JVC Projector do not appear correctly or look strange, adjust the “Color” and “Tint” settings in the setting menu.
D
Daniel RussoSep 9, 2025
Why are video images missing on my JVC DLA-RS35?
- R
  Robert OrrSep 9, 2025
  If video images are missing from your JVC Projector, check if a screen mask has been set. If so, set “Mask” in the setting menu to “Off.” Also, the display might be out of position, so alter the “Picture Position” value in the setting menu.
C
Courtney GarciaSep 12, 2025
How to fix image output via HDMI terminal on JVC DLA-RS35 Projector?
- B
  Bonnie McleanSep 12, 2025
  To resolve the issue of the image not outputting via the HDMI terminal on your JVC Projector, ensure that the “Control with HDMI” function is set to “Off”.