JVC DR-MV7SU - Initial Setup Wizard

18
Initial Setup W
Initial Setup W
izard
izard
When STANDBY/ON is pressed for the first time to
turn the unit on, the Initial Setup Wizard function sets
the Language, Channels and Clock.
1. Use v / V to select a language for the Setup
menu and information display and then press
ENTER.
2. Check your antenna connections.
Press B to move next step.
3. Press ENTER to begin the channel search.
4. Select [Auto] or [Manual] Clock Set option then
press ENTER.
Auto
1. Use v / V to choose your Time Zone
manually.
2. Use B to choose the [Daylight Savings]
option. Use v / V to choose Auto, ON, or
OFF.
3. Press ENTER to confirm your setting.
Manual
1. Enter the necessary information for year, date
and time.
b / B (left/right): Moves the cursor to the
previous or next column.
v / V (up/down): Changes the setting at the
current cursor position.
2. Press ENTER to confirm your setting.
5. Press ENTER to complete the Setup Wizard.
Note:
You can reset the Initial Setup Wizard from the
[Factory Set] in the setup menu.(see page 21).