Why doesn't the charging light turn on for my JVC Everio GZ-HD3 Camcorder?
If your JVC Camcorder's access/charge lamp doesn't light during charging, it could be due to extreme temperatures which halt charging to protect the battery. Charge in a place where the temperature is between 10°C to 35°C (50°F to 95°F). If the battery is already fully charged, the lamp will not light. Check the remaining battery power.
How to fix JVC Everio GZ-HD3 Camcorder when no power is supplied?
To address a JVC Camcorder not powering on, ensure the AC adapter is securely connected. Also, try detaching and re-attaching the battery pack firmly, or replace a dead battery with a fully charged one.
What to do if my JVC Camcorder has no display?
If your JVC Camcorder doesn't display anything, and the camera hasn't been used for 5 minutes, it might have turned off automatically to save power. To turn it back on using the battery, switch the power/mode to OFF, then ON. If you're using the AC adapter, try any operation like zooming. You can also adjust the LCD monitor's brightness.
Why does my JVC Camcorder keep turning off?
If your JVC Camcorder turns off accidentally, move to a location less prone to vibration or loud noises. The drop detection function might have activated; set the power/mode switch to OFF, then ON again. To disable this function, set [DROP DETECTION] to [OFF].
Why does my JVC Camcorder battery die so fast?
If your JVC Camcorder's battery drains too quickly, even after a full charge, ensure you're using the camera within appropriate operating temperatures. If the issue continues, the battery is likely worn out and needs replacement.
Why is my JVC Everio GZ-HD3 Camcorder battery showing the wrong percentage?
To address discrepancies in your JVC Camcorder's displayed battery power, fully charge the battery and then let it run down completely. If the problem continues, the battery is likely old and needs to be replaced.
Why can't I record with my JVC Everio GZ-HD3?
If your JVC Camcorder won't record, the recording medium may be full. Delete unnecessary files or replace the SD card. Also, ensure the recording medium is properly selected.
Why is my JVC Camcorder so slow?
If your JVC Camcorder is processing data slowly after powering on or changing modes, and you have many still images (approximately 1,000 or more) stored on the recording medium, copy these files to another device and then delete them from the recording medium.
General| Optical Zoom | 10x |
|---|---|
| Digital Zoom | 200x |
| LCD Screen Size | 2.8 inches |
| Video Resolution | 1920 x 1080 |
| LCD Screen Pixels | 207, 000 |
| Sensor Type | 3CCD |
| Storage Media | Hard Drive |
| Lens | Fujinon |
| Type | Camcorder |
To Next Page
