Why the lamp does not flash during battery pack charging on my JVC Everio GZ-HD320?
The lamp may not flash during battery pack charging on your JVC Camcorder because when the battery pack is fully charged, the lamp does not flash. Check the remaining battery pack charge. Also, when recharging in either a hot or cold environment, ensure that battery is being charged within the permitted temperature range.
Why does my JVC Camcorder recording stop by itself?
If your JVC Camcorder stops recording by itself, this may be due to several reasons. First, the camcorder temperature may have increased, in which case you should turn it off, wait for a while, and start recording again. Second, you might be in a place affected by excessive sound or vibration, so move away from such locations. Third, a malfunction may have occurred in the HDD, in which case, record to a microSD card. Finally, ensure a commercially available microSD card is inserted and that both [REC MEDIA FOR VIDEO] and [REC MEDIA FOR IMAGE] are set to [SD].
How to fix too dark recorded subject on JVC Everio GZ-HD320?
To fix a JVC Camcorder that's recording subjects too darkly, try the following: Use backlight compensation, set [GAIN UP] to [AGC] or [AUTO], use [NIGHT] from scene select, or set the brightness to the [+] side.
What to do if my JVC Camcorder has no power?
To resolve the issue of no power being supplied to your JVC Camcorder, ensure that you connect the AC adapter correctly and recharge the battery pack.
How to fix too bright recorded subject on JVC Camcorder?
To address a JVC Camcorder recording subjects too brightly, first, set the backlight compensation to [OFF] if it is currently being used. Second, set the brightness to the [–] side.
What to do if I cannot find a recorded video on my JVC Everio GZ-HD320?
If you cannot locate a recorded video on your JVC Camcorder, first select [PLAYBACK OTHER FILE] and then search for the video on the index screen. Also, make sure to cancel group display and date search functions. Finally, verify the setting in [REC MEDIA FOR VIDEO] or [REC MEDIA FOR IMAGE].
What to do if my JVC Camcorder cannot perform recording?
If your JVC Camcorder is not recording, slide the mode switch to select the desired mode (! or #).
What to do if my JVC Camcorder battery display is not correct?
If the remaining battery display on your JVC Camcorder is inaccurate, fully charge the battery pack, let it run down completely, and then recharge it again. Note that using the camcorder for extended periods in very high or low temperatures, or repeatedly charging the battery pack, can also affect the battery display.
What to do if JVC Camcorder turns off after low temperature message?
If your JVC Camcorder displays a low temperature message and then turns off when it warms up, turn the camcorder on again to start using it.
What to do if image or sound does not appear on TV properly with HDMI cable from JVC Everio GZ-HD320?
If the image or sound does not appear on the TV properly when connecting your JVC Camcorder to the HDMI cable, disconnect the HDMI cable and connect it again. Also, try turning off and on the camcorder again.
Covers electrical shock, fire hazards, and environmental considerations for safe operation.
Key instructions for safe usage and handling of the camcorder.
Step-by-step process to configure the device's date, time, and time zone.
Steps to select recording mode, start, and stop video recording.
Instructions for selecting and playing recorded video files.
Explanation of icons and indicators displayed on the LCD during video and still image recording.
Steps for connecting the AC adapter and charging the battery.
Guide to configuring the camcorder's date and time settings.
Step-by-step guide to begin and end video recording.
Steps to select still image mode, focus, and take pictures.
Steps for selecting files, playing, pausing, and searching videos.
Steps for selecting files, viewing slide shows, and zooming.
Procedure to switch from auto to manual recording mode.
Adjusting focus, brightness, and other parameters in manual mode.
Instructions for connecting via HDMI and Component interfaces.
How to extract a still frame from a recorded video clip.
Methods for copying files to HDD, microSD, DVD, or BD burners.
Instructions for dubbing video content to a VCR or DVD recorder.
Guide to installing the provided software for disc creation.
Steps to enable export mode for transferring videos to iTunes.
Enabling the mode for uploading videos to websites like YouTube.
Solutions for common problems like no power or display issues.
General| Sensor Type | CMOS |
|---|---|
| Optical Zoom | 10x |
| Digital Zoom | 200x |
| Image Stabilizer | Optical |
| LCD Screen Size | 2.7 inches |
| Camcorder Media Type | Hard drive |
| Hard Drive Capacity | 120 GB |
| Video Resolution | 1920 x 1080 |
| Image Format | JPEG |
| Max Video Resolution | 1920 x 1080 |
| HDMI Output | Yes |
| USB Interface | USB 2.0 |
| Battery Type | Lithium-ion |
| Recording Format | AVCHD |
To Next Page
