H
Heather ObrienAug 22, 2025
Why is the LCD monitor difficult to see on my JVC Everio GZ-HD320 Camcorder?
- GGary RamseyAug 22, 2025
The LCD monitor may be difficult to see on your JVC Camcorder if used in bright areas such as under direct sunlight.
To Next PageTo Next PageWhy is the LCD monitor difficult to see on my JVC Everio GZ-HD320 Camcorder?
The LCD monitor may be difficult to see on your JVC Camcorder if used in bright areas such as under direct sunlight.
Why does my JVC Camcorder recording stop by itself?
If your JVC Camcorder stops recording by itself, this may be due to several reasons. First, the camcorder temperature may have increased, in which case you should turn it off, wait for a while, and start recording again. Second, you might be in a place affected by excessive sound or vibration, so move away from such locations. Third, a malfunction may have occurred in the HDD, in which case, record to a microSD card. Finally, ensure a commercially available microSD card is inserted and that both [REC MEDIA FOR VIDEO] and [REC MEDIA FOR IMAGE] are set to [SD].
How to fix too dark recorded subject on JVC Everio GZ-HD320?
To fix a JVC Camcorder that's recording subjects too darkly, try the following: Use backlight compensation, set [GAIN UP] to [AGC] or [AUTO], use [NIGHT] from scene select, or set the brightness to the [+] side.
What to do if my JVC Camcorder has no power?
To resolve the issue of no power being supplied to your JVC Camcorder, ensure that you connect the AC adapter correctly and recharge the battery pack.
How to fix too bright recorded subject on JVC Camcorder?
To address a JVC Camcorder recording subjects too brightly, first, set the backlight compensation to [OFF] if it is currently being used. Second, set the brightness to the [–] side.
Why is my JVC Camcorder remote control not working?
If your JVC Camcorder's remote control isn't working, first, replace the battery. Second, ensure that [REMOTE] is set to [ON]. Third, consider that the remote control may not operate outdoors or in places exposed to strong light.
Why is the focus not adjusted automatically on my JVC Camcorder?
If the focus on your JVC Camcorder is not adjusting automatically, first, wipe the lens with a lens cleaning cloth. Second, if you are recording in a dark place or a subject that has no contrast between dark and light, adjust the focus manually.
Why is the remaining battery display not correct on my JVC Everio GZ-HD320?
If the remaining battery display on your JVC Camcorder is not correct, and if the camcorder is used for long periods of time in high or low temperatures, or if the battery pack is repeatedly charged, fully charge the battery pack, run it down, and then recharge it again.
Why did the language on the display change on my JVC Everio GZ-HD320?
If the language on the display of your JVC Camcorder changed, it may occur when you connect the camcorder to a TV with different language setting using an HDMI cable.
What to do if image or sound does not appear on TV properly with HDMI cable from JVC Everio GZ-HD320?
If the image or sound does not appear on the TV properly when connecting your JVC Camcorder to the HDMI cable, disconnect the HDMI cable and connect it again. Also, try turning off and on the camcorder again.
General| Sensor Type | CMOS |
|---|---|
| Optical Zoom | 10x |
| Digital Zoom | 200x |
| Image Stabilizer | Optical |
| LCD Screen Size | 2.7 inches |
| Camcorder Media Type | Hard drive |
| Hard Drive Capacity | 120 GB |
| Video Resolution | 1920 x 1080 |
| Image Format | JPEG |
| Max Video Resolution | 1920 x 1080 |
| HDMI Output | Yes |
| USB Interface | USB 2.0 |
| Battery Type | Lithium-ion |
| Recording Format | AVCHD |
