13
ENGLISH
Manual presetting
After tuning in the station you want to preset...
1
2 Select “List”, then a preset number
(1–6) you want to store the station
into.
• You can also display the list by pressing and
holding 5/∞ buttons.
3
Stored preset number flashes for a while.
How to exit from menus or lists
Menu or list operations are canceled and the
screen returns to the source screen.
3 Finish the procedure.
Lights up when “Local” mode is activated.
Only stations with sufficient signal strength
will be detected.
To tune in to all receivable stations, repeat the
same procedure to set “DX / Local” to “DX”.
The LO indicator goes off and the DX indicator
lights up.
ENT
Storing stations in memory
You can preset six stations for each band.
FM station automatic presetting —
SSM (Strong-station Sequential Memory)
After selecting the FM band (FM1 – FM3) you
want...
1
2 Select “Mode”, then “SSM”.
3
“SSM” is shown until automatic presetting
is over.
Local FM stations with the strongest signals are
searched and stored automatically in the FM
band.
ENT
MENU
SRC
D
DISP
ENT
EX.: Storing 92.5
MHz into preset
number 4 of FM1
MENU
AVX2EN_book.indb 13AVX2EN_book.indb 13 06.1.25 6:19:54 PM06.1.25 6:19:54 PM
To Next Page
Loading...
Need help?
General
