JVC EXAD KW-AVX826

42
When a call comes in...
The source is changed to “ Bluetooth ” automatically.
When <Auto Answer> is activated...
The unit answers the incoming call automatically.
( 27)
Using the Bluetooth cellular phone
When <Auto Answer> is deactivated...
To answer the incoming call
• Press the message displayed on the touch panel.
• Press any button on the monitor panel (except
or VOL +/–).
To end the call
• Hold the message displayed on the touch panel.
• Hold any button on the monitor panel (except
or VOL +/–).
• You can adjust the microphone volume, 28.
~ Press [SOURCE], then press [BLUETOOTH].
Ÿ Press [ ] or MENU.
! Press [Bluetooth].
⁄ Establish the connection with a device, then make a call (or settings using <Bluetooth>
menu). (
25 – 28)
To make a call, use <Dial Menu>. ( 25)
Name and phone number (if acquired)
FLAT
Connected Device Name
Current Track Title
Artist Name
Album Title
Status of the device
• Signal strength/Battery remainder (only when
the information comes from the device).
Connected device name
•
or appears
depending on the device
connected.
• When no audio device
is connected, “No Audio
Device” appears.
Activates <
Voice Dialing>
function. (Hold)
• To cancel <
Voice Dialing>,
hold any button on the
monitor panel (except
or VOL +/–).
• Displays <
Dial Menu> screen.
• Displays <
Redial> menu. (Hold)
Bluetooth icon
• Turns blue when a Bluetooth device is
connected.
EN_KW-AVX826[U].indb 42EN_KW-AVX826[U].indb 42 09.2.4 10:50:39 AM09.2.4 10:50:39 AM