JVC EXAD KW-AVX826

6
Using the monitor panel/touch panel
1 Resets the unit. ( 3)
2 • Turns on the power.
• Attenuates the sound (if the power is on).
• Turns off the power. (Hold)
3 • Adjusts the volume.
• Bluetooth (phone) : Adjusts the volume of the
incoming calls. *
1
4 • Displays <Dial Menu> screen. ( 25)
• Displays <Redial> menu. (Hold) ( 25)
5 • Selects the source. *
2
TUNER = DISC (DVD/VCD/CD) =
USB/USB iPod = CD-CH/iPod/EXT-IN
= Bluetooth = AV-IN = (back to the
beginning)
6 Touch panel (see the following pages).
Most of the operations are explained using the
touch panel unless mentioned otherwise.
7 Remote sensor
8 • Displays <AV Menu> screen. ( 13)
• Activates <Voice Dialing> function. (Hold)
( 25)
9 • Changes the display information. *
3
• Turns off the screen (touch panel) when the unit
is turned on. *
4
(Hold)
p • Change the source to “ USB ” or “ USB-iPod .”
• Change the iPod/iPhone control for “ USB-
iPod .” (Hold) ( 46)
q • Displays <Open/Tilt> screen. ( 8)
• Ejects the disc and display <Open/Tilt>
screen. (Hold)
• Closes the monitor panel if pressed when the
panel is open.
w Monitor panel
Displays <AV Menu> screen, ( 13)
Displays the <Source Menu> screen, (
8)
Displays the Short Cut icons, (
8)
USB cable from the rear of the unit, (
40, 46)
EN_KW-AVX826[U].indb 6EN_KW-AVX826[U].indb 6 09.2.4 10:50:12 AM09.2.4 10:50:12 AM