18 EN
FEATURE: Picture Stabiliser
PURPOSE: To compensate for unstable images
caused by camera-shake, particularly
at high magnification.
OPERATION: 1) Press P. STABILIZER. “
”appears.
n To switch off the Picture
Stabiliser, press P. STABILIZER.
The indicator disappears.
NOTES: ●
Accurate stabilisation may not be
possible if hand shake is excessive,
or under the following conditions:
•
When shooting subjects with
vertical or horizontal stripes.
•
When shooting dark or dim
subjects.
•
When shooting subjects with
excessive backlighting.
•
When shooting scenes with
movement in various directions.
•
When shooting scenes with low-
contrast backgrounds.
●
Switch off the Picture Stabiliser
when recording with the
camcorder on a tripod.
RECORDING
Basic Features (cont.)
P. STABILIZER
To Next Page
