I DubbingToAVCR
To AV connecto
Audio/Video
cable
Open the cover,
EDITING EN 35
1 Following the illustrations, connect the
camcorder and the VCR's input connectors.
2 Start playback on the camcorder. ( pg. 20)
3 At the point you want to start dubbing, start
recording on the VCR. (Refer to the VCR's
instruction manual.)
4 To stop dubbing, stop recording on the VCR,
then stop playback on the camcorder.
NOTES:
• It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
( pg. 13)
• Tochoose whether or not the following displays
zv
O Yellow to VIDEO IN
@ Red to AUDIO R IN
O White to AUDIO L IN
appear on the connected TV
• Date/time
Set "DATE/TIME" to AUTO", ON" or OFF".
( pg. 22, 27)
• Time code
Set "TIME CODE" to "OFF" or "ON".
C Pg. 22, 27)
• Indications other than date/time and time code
Set ON SCREEN" to OFF", "LCD" or LCD/
TV". ( pg. 22, 27)
To Next Page
Loading...
