JVC GR-D244 - Changing the Menu Settings

22 EN MENUSFORDETAILEDADJUSTMENT
n ChangingTheMenuSettings MenuswithoutSubMenus
WIPE/FADER Selected menu icon
This camcorder is equipped with an easy-to-use,
on-screen menu system that simplifies many of
the more detailed camcorder settings.
( -pg. 23-27)
Lock Button
MENU
Power Switch
1 For Video Recording Menus:
Set the Power Switch to "_" while pressing
down the Lock Button located on the switch.
For Video Playback Menus:
Set the Power Switch to "PLAY" while pressing
down the Lock Button located on the switch.
2 Open the LCD monitor fully. ( pg. 18)
3 Press MENU. The Menu Screen appears.
4 Press + or - to select the desired function,
and press MENU. The selected function menu
appears.
Screen for Video Screen for Video
Recording Menu Playback Menu
WIPE t FADER
5 Setting procedure hereafter depends on the
selected function.
( pg. 33) blinks.
D PROGRAM AE Selected
( pg. 34) parameter
EXPOSURE
(: pg. 30)
I_ W. BALANCE
( pg. 32)
1) Press + or -to select
the desired parameter.
• Example: D PROGRAM
AE Menu
2) Press MENU. Selection is complete. The
Menu Screen returns.
• Repeat the procedure if you wish to set other
function menus.
3) Press MENU. The Menu Screen closes.
MenuswithSubMenus
[] CAMERA (:, pg. 23) Selected menu icon
MANUAL blinks,
( pg. 24)
SYSTEM (: pg. 25)
CAMERA DISPLAY
( pg. 26)
E_ VIDEO (:- pg. 26)
tr_ VIDEO DISPLAY
( pg. 27)
1) Press + or -to select
the desired function,
and press MENU. The Sub Menu
Sub Menu appears.
• Example: _ CAMERA
Menu
2) Press + or -to select
the desired parameter.
3) Press MENU.
Selection is complete.
• Repeat the procedure if
you wish to set other
function menus.
4) Press MENU. The
Menu Screen returns.
• Repeat the procedure if
you wish to set other
function menus.
5) Press MENU. The Menu Screen closes.
Selected function