EDITING
26 EN
MasterPage: Left
It is also possible to transfer still/moving images to a PC
with a DV connector by using the provided software,
software equipped with the PC or commercially available
software.
NOTES:
● Refer to “SOFTWARE INSTALLATION AND DV
CONNECTION GUIDE” for the installation of the bundled
software and drivers.
● The software operation manual is provided as PDF file on
the CD-ROM.
● It is recommended to use the AC Adapter as the power
supply instead of the battery pack. (墌 pg. 7)
● When using a DV cable, be sure to use the optional
JVC VC-VDV206U or VC-VDV204U DV cable depending
on the type of DV connector (4 or 6 pins) on the PC.
● The date/time information cannot be captured into the PC.
● Refer to the instruction manuals of the PC and Software.
● The system may not work properly depending on the PC or
capture board you are using.
Connection To A Personal Computer
PC with DV
connector
To DV IN/OUT
To DV
connector
Core filter
Core filter
DV cable (optional)
GR-D32US.book Page 26 Friday, November 21, 2003 9:31 AM
To Next Page
Loading...
Need help?
General
