EN 25
MENUS FOR DETAILED ADJUSTMENT
MasterPage: Start_Right
ADVANCED FEATURES
VTR
[SP]*: To record in the SP (Standard Play) mode
LP: Long Play - more economical, providing 1.5
times the recording time.
* SP indicator does not appear on the screen.
NOTES:
● If the recording mode is switched, the playback
picture will be blurred at the switching point.
● It is recommended that tapes recorded in the LP
mode on this camcorder be played back on this
camcorder.
● During playback of a tape recorded on another
camcorder, blocks of noise may appear or there
may be momentary pauses in the sound.
[12BIT]: Enables video recording of stereo
sound on four separate channels, (equivalent to
the 32 kHz mode of previous models)
16BIT: Enables video recording of stereo sound
on two separate channels. (Equivalent to the
48 kHz mode of previous models)
DISPLAY
The “DISPLAY” settings except (“CLOCK ADJ.”,
“16:9 OUTPUT” and “BRIGHT”) are effective
only for shooting.
LCD: Keeps the camcorder’s display (except the
date, time and time code) from appearing on the
connected TV screen.
[LCD/TV]: Makes the camcorder’s display
appear on screen when the camcorder is
connected to a TV.
[OFF]: The date/time does not appear.
ON: The date/time is always displayed.
墌 pg. 14, “Date/Time Settings”
[OFF]: Time code is not displayed.
ON: Time code is displayed on the camcorder and
on the connected TV. Frame numbers are not
displayed during recording. (墌 pg. 19)
To enable your tv to display images in 16:9 wide
mode, set the tv screen size correctly.
4:3TV: For TV with an aspect ratio of 4:3.
[16:9TV]: For TV with an aspect ratio of 16:9.
墌 pg. 14, “Brightness Adjustment Of The
Display”
REC MODE
SOUND MODE
ON SCREEN
DATE/TIME
CLOCK ADJ.
TIME CODE
16:9 OUTPUT
BRIGHT
CONTINUED ON NEXT PAGE
GR-D750AA.book Page 25 Tuesday, January 30, 2007 5:41 PM
To Next Page
Loading...
Need help?
General
