70 EN
USING THE REMOTE CONTROL UNIT
(cont.)
ROSYNCH
O. 1
–
ADJUSTMENT OF VCR/CAMCORDER
TIMING
4
Point the remote control at the camcorder’s remote
sensor and press R.A.EDIT ON/OFF to make the
Random Assemble Editing menu disappear, then
press the MENU wheel. The Menu Screen appears.
5
Rotate the MENU wheel to select “ VIDEO” and
press it. The VIDEO Menu appears. Then, rotate it to
“SYNCHRO” and press it. The value for “SYNCHRO”
is highlighted.
6
Based on the diagnostics performed (墌 pg. 69), you
can now advance the VCR’s record timing by rotating
the MENU wheel towards “䊱”. You can also delay
the VCR’s record timing by rotating the MENU wheel
towards “䊲”. The adjustment range is from –1.3 to
+1.3 seconds, in 0.1-second increments.
Press the MENU wheel to finish the setting.
7
Rotate the MENU wheel to select “
1
RETURN” and
press it twice.
Now perform Random Assemble Editing beginning
with step 4 on page 67.
NOTES:
●
Before performing actual Random Assemble Editing, do
a few Random Assemble Editing trial runs to check
whether the value you have input is appropriate or not,
and make adjustments accordingly.
●
Depending on the recorder, there may be situations
where the timing difference cannot be fully corrected.
Display
MENU Wheel
VCR
(Recording deck)
TV
To Next Page
Loading...
Need help?
General
