48
EN
Title Impose
A selection of titles/frames stored on the provided
memory card can be superimposed.
TITLE SELECTION
1 Load the provided memory card (墌 pg. 13). Set
the Power Switch to “ ” while pressing down the
Lock button located on the switch.
2 Press INDEX so that the Title Index screen
appears.
3 Rotate the MENU wheel to select the desired title,
then press it.
4 Press the MENU wheel in. The Menu Screen
appears. Rotate the MENU wheel to select
“ SYSTEM” and press it.
5 Rotate the MENU wheel to select “TITLE W/” and
press it. The Sub Menu appears. Select the desired
mode by rotating the MENU wheel and press it.
BACKGRND : Superimposes the title/frame over
images.
IMAGE : Superimposes the title/frame with its
white background.
6 Rotate the MENU wheel to select “ RETURN”
and press it twice. Selection is complete.
TITLE RECORDING
7 Press TITLE during recording. The selected title/
frame is recorded.
• Press TITLE again to turn off the title/frame.
NOTES:
● Title Impose can also be used for dubbing.
● You can delete unwanted titles/frames (
墌 pg. 50,
“Deleting Files”) or protect important ones from
accidental erasure (墌 pg. 49, “Protecting Files”).
● A title/frame created on a PC can be transferred to a
memory card using the provided software. Transferred
titles/frames are displayed from Title Index number 10,
and they can be used together with the titles/frames on
the provided memory card. For details on creating/
transferring titles/frames, refer to the software
instructions.
1 2 3
4 5 6
7 8 9
TITLE Button
MENU Wheel
INDEX Button
Display
Title
Index
Screen
ADVANCED FEATURES
(cont.)
To Next Page
Loading...
