What to do if there is no picture on my JVC GR-DV700 Camcorder?
If there is no picture on your JVC Camcorder, it might not be getting power, or some other malfunction exists. Try turning the camcorder’s power off and on again.
What to do if “SET DATE/TIME!” appears on my JVC Camcorder?
If “SET DATE/TIME!” appears on your JVC Camcorder, it means the built-in clock’s rechargeable lithium battery is discharged or the previously set date/time is erased. To fix this, connect the camcorder to an AC outlet using the AC Adapter for over 24 hours to charge the clock’s lithium battery.
How to troubleshoot a JVC GR-DV700 that has no power?
If your JVC Camcorder is not supplying power, ensure the AC Power Adapter/Charger is securely connected. Also, a dead battery could be the cause, so replace it with a fully charged one. Finally, make sure the LCD monitor is fully open or the viewfinder is pulled out when recording.
How to fix blocks of noise during JVC GR-DV700 Camcorder playback?
To resolve blocks of noise during playback, or a blue screen with no picture on your JVC Camcorder, clean the video heads with an optional cleaning cassette.
Why is digital zoom not working on my JVC GR-DV700 Camcorder?
If the digital zoom isn't working on your JVC Camcorder, set 'ZOOM' to '40X' or '300X'. Also, ensure the VIDEO/MEMORY Switch is set to 'VIDEO'.
How to display date and time during JVC Camcorder recording?
To enable the date and time display during recording on your JVC Camcorder, ensure that 'DATE/TIME' is set to 'ON'.
What to do if my JVC GR-DV700 Camcorder won't playback the memory card?
If a memory card cannot be played back on your JVC Camcorder, ensure the Power Switch is set to 'PLAY'. Also, check that the VIDEO/MEMORY Switch is set to 'MEMORY'.
What to do if the JVC GR-DV700 Camcorder tape is moving, but there is no picture?
If the tape is moving but there is no picture on your JVC Camcorder, set the TV to the correct mode for video playback. Also, ensure that the cassette holder cover is closed.
Why won't my JVC Camcorder play, rewind, or fast-forward?
If the Play, Rewind, and Fast-Forward functions aren't working on your JVC Camcorder, make sure the Power Switch is set to 'PLAY'. Also, check that the VIDEO/MEMORY Switch is set to 'VIDEO'.
What to do if my JVC Camcorder is not recording?
If your JVC Camcorder isn't recording, check that the Power Switch is set to 'A' or 'M'. Also, verify the tape’s erase protection tab is set to 'REC'. Ensure the VIDEO/MEMORY Switch is set to 'VIDEO'. If 'TAPE END' appears, replace the cassette. Finally, make sure the cassette holder cover is closed and the VIDEO/MEMORY Switch is set to 'MEMORY'.
General| Optical Zoom | 10x |
|---|---|
| Image Sensor | CCD |
| Optical Sensor Size | 1/4 inch |
| Video Resolution | 720 x 480 |
| LCD Screen Size | 2.5 inches |
| Image Stabilizer | Electronic |
| Display Type | LCD |
| Viewfinder | Color |
| Microphone Operation Mode | Stereo |
| Battery Type | Lithium-ion |
| Video Recording Format | DV |
| Type | MiniDV |
| Recording Media | MiniDV tape |
| Focus Adjustment | Manual / Auto |
| Microphone | built-in |
| Connector Type | FireWire |
To Next Page
