To Next PageTo Next PageWhy does White Balance cannot be activated on JVC Camcorder?
If White Balance cannot be activated on your JVC Camcorder, the Sepia or Monotone mode may be activated. Turn off Sepia or Monotone before setting White Balance.
What to do if Digital Zoom does not work on JVC Camcorder?
If Digital Zoom doesn't work on your JVC Camcorder, 16X optical zoom might be selected. Set “ZOOM” to “40X” or “700X” in the Menu Screen.
Why does The charger indicator on the camcorder does not light on JVC GR-DVL120?
The temperature of the battery is extremely high/low. To protect the battery, it is recommended to charge it in places with a temperature of 10°C to 35°C (50°F to 95°F). Also, charging is difficult in places subject to extremely high/low temperatures. To protect the battery, it is recommended to charge it in places with a temperature of 10°C to 35°C (50°F to 95°F).
Why is the image taken using Snapshot too dark on JVC Camcorder?
If the snapshot image on your JVC Camcorder is too dark, it might be because shooting was performed under backlit conditions. Press the BACKLIGHT Button.
Why is the image taken using Snapshot too bright on JVC Camcorder?
If the snapshot image on your JVC Camcorder is too bright, it could be because the subject is too bright. Set “PROGRAM AE” to “SPOTLIGHT” in the Menu Screen.
Why is there no picture on my JVC GR-DVL120?
If there is no picture on your JVC Camcorder, the camcorder is not getting power, or some other malfunction exists. Turn the camcorder’s power off and on again.
What to do if the images on the LCD monitor of JVC GR-DVL120 appear dark or whitish?
If images on your JVC Camcorder's LCD monitor appear dark in low temperatures, adjust the brightness and angle of the LCD monitor. Note that displayed colors may differ from recorded colors, which is not a defect of the camcorder.
How to fix JVC Camcorder if the focus does not adjust automatically?
If the focus on your JVC Camcorder isn't adjusting automatically, it might be set to Manual mode. Set it to Auto mode. Also, if recording was done in a dark place or the contrast was low, or if the lens is dirty, clean the lens and check the focus again.
What to do if “SET DATE/TIME!” appears on JVC GR-DVL120 Camcorder?
The “SET DATE/TIME!” message appears on your JVC Camcorder because the date and time have not been set. Also, the built-in clock battery may have run out, erasing the previously set date/time. In this case, consult your nearest JVC dealer for replacement.
What to do if recording cannot be performed on JVC Camcorder?
If your JVC Camcorder isn't recording, check a few things: the tape's erase protection tab might be set to “SAVE”—set it to “REC”. The Power Switch might be set to “PLAY” or “OFF”—set it to “ ” or “ ”. Also, the cassette holder cover should be closed, and if “TAPE END” appears, replace the cassette.
General| Recording Media | MiniDV |
|---|---|
| Optical Zoom | 10x |
| Digital Zoom | 200x |
| LCD Screen Size | 2.5 inches |
| Effective Pixels | 680, 000 pixels |
| Still Image Format | JPEG |
| Type | Camcorder |
| Image Sensor | CCD |
| Zoom | 10x optical |
| LCD Screen | Color LCD |
| Viewfinder | Color viewfinder |
| Video Recording Format | DV |
| Interface | IEEE 1394 (FireWire), USB, A/V output |
General warnings about electrical shock and product safety.
Key guidelines for safe operation and product care.
Essential components included with the camcorder.
How to connect the AC adapter and charge the battery.
Grip, viewfinder, strap, and tripod mounting.
Loading tapes and selecting recording settings.
Steps for starting and stopping recording.
Normal, still, shuttle, and frame-by-frame playback.
Diagrams for connecting to TVs and VCRs.
Night-Alive, Program AE, special effects.
Adjusting focus, exposure, and color balance.
How to access and set recording parameters.
How to access and set playback parameters.
Transferring footage to a VCR.
Copying footage using a DV cable.
Installing battery and using remote functions.
Transferring images via DV cable.
Important operational details and tips.
Exterior, LCD monitor, and lens cleaning.
Safety guidelines for batteries and tapes.
Precautions for handling the device.
Warnings about moisture and serious issues.
