JVC GR-DVL166 User Manual

36 EN
COPY OFF–
COPY
MDOESOUND
MDOE
12 BIT
ROSYNCH
ODEREC M
STEREO–
SOUND
1
SP
–
–
–
NRETUR
O.O
RE NEON SC LCD / TV
UAOTIMETDATE /
T I ME CODE
–
–
– FFO
NRETUR
BEEP
MELODY
NO
TALLY
–
–
ID UNMERB –
60
DEMO MODE – NO
NRETUR
CAM ERSET
MSYSTE
AYDISPL
VIDEO SOUND MODE
MODE
MODE
12 BIT
SYNC ROH
REC
END
For Playback Menu
The following procedure applies to all except Synchro
Comp ( pg. 47).
1 Set the Power Switch to “PLAY” while pressing
down the Lock Button located on the switch.
2 Press the MENU/BRIGHT wheel in. The Menu
Screen appears.
3 Rotate the MENU/BRIGHT wheel to select the
desired function menu, and press it. The selected
function menu appears.
4 Rotate the MENU/BRIGHT wheel to select the
desired function, and press it to display the Sub Menu.
5 Rotate the MENU/BRIGHT wheel to select the
desired parameter and press it. Selection is complete.
6 Rotate the MENU/BRIGHT wheel to select “
RETURN” and press it twice to close the Menu Screen.
Display
Power Switch
MENU/BRIGHT Wheel
Recording Start/Stop Button
USING MENUS FOR DETAILED ADJUSTMENT (cont.)
Lock Button
NOTE:
“REC MODE” can be set when the Power Switch is set to
“PLAY” or “
M
ANUAL
” ( pg. 13, 33).
Menu Screen Explanations
SYSTEM
DISPLAY
Each setting is linked with “
DISPLAY” or “ SYSTEM”, which
appears when the Power Switch is
set to “
MANUAL
” ( pg. 34, 35).
The parameters are the same as in
the description on pg. 34, 35.
 pg. 37.
 pg. 37.
 pg. 47.
Allows you to set the tape
recording mode (SP or LP)
depending on your preference
( pg. 13).
SOUND MODE
12BIT MODE
SYNCHRO
REC MODE
VIDEO

JVC GR-DVL166 Specifications

General

Brand	JVC
Model	GR-DVL166
Category	Camcorder
Language	English