88 EN
INDEX
Indications
LCD Monitor/Viewfinder Indications During Video Recording Only
1 Displays the selected Fade/Wipe effect.
(墌 pg. 36, 37)
2 Appears when in the Squeeze, Cinema or PS
Wide mode. (墌 pg. 30)
3
*
Displays the recording mode (SP or LP).
(墌 pg. 13)
4
*
Displays the tape remaining time. (墌 pg. 18)
5 • “REC” appears during recording.
•“PAUSE” appears during Record-Standby mode.
(墌 pg. 18)
6 Appears when the wind cut mode is engaged to
cut down on noise created by wind. (墌 pg. 31)
7 Appears while the tape is running. (墌 pg. 18)
8 5S MODE/ANIM. MODE: Displays the 5 second
recording mode or Animation recording mode.
(墌 pg. 30, 35)
9 Displays the sound mode for approx. 5 seconds
after turning on the camcorder. (墌 pg. 29)
0 Displays the Time Code. (墌 pg. 23, 31)
*Setting “ON SCREEN” to “SIMPLE” in the Menu Screen removes indications marked with * from the screen
(墌 pg. 31, 43).
1 Displays the Picture Quality/Size mode of the
stored image. There are 4 modes available:
XGA FINE, XGA STD, VGA FINE and VGA STD
(in order of quality). (墌 pg. 15)
2 Appears and blinks during shooting. (墌 pg. 21)
3 • Appears during shooting.
•Blinks when a MultiMediaCard is not loaded.
(墌 pg. 21)
4 Displays the number of images that have already
been shot. (墌 pg. 21)
5 Displays the total number of shots that can
be stored, including those already taken.
(墌 pg. 21)
LCD Monitor/Viewfinder Indications During D.S.C. Recording Only
TC
2
A
S
3
N
O
:
I
U
2
M
N
5
.
D
MO
1
D
2
E
BIT
SP
35
R
4
E
4
C
4
0 9 8
1
2
3
*
4
*
7 6
5
XGA
STD
10/24
4 52 31
These indications also appear during DUAL mode.
To Next Page
Loading...
