EN17
RETAKE (
2
/
3
)
Button
FEATURE:
Quick Review
PURPOSE:
To check the end of the last recording.
OPERATION:
1) Press
2
and release quickly during the Record–
Standby mode.
n Tape is rewound for about 1 second and played
back automatically, then pauses in Record–Standby
mode for the next shot.
NOTE:
Distortion may occur at the start of playback. This is
normal.
FEATURE:
Retake
PURPOSE:
To re-record certain segments.
OPERATION:
1) Make sure the camcorder is in the Record–Standby
mode.
2) Press and hold either RETAKE to reach the start point
for new recording. Pressing
3
forwards the tape
and pressing
2
reverses it.
3) Press the Recording Start/Stop Button to start
recording.
NOTE:
Noise bars appear and pictures may become
monochrome or darken during Retake. This is normal.
To Next Page
Loading...
Need help?
General
