P.STABILIZER Button
Display
Picture stabilizer h_dicator
V
Power Switch
FEATURE:Picture Stobi[ixer
PURPOSE:
1_ compensate for unstable images caused by camera-
shake, particularly at high magnification.
OPERA DON:
1) Press P. STABILIZER. "L-"O,_"appears.
[] ]_ switch off the Picture Stabilizer, press
P. STABILIZER. The indicator disappears.
NOTES:
• Accurate stabilization may not be possible if hand
shake is excessive, or under the following condi-
tions:
When shooting subjects with vertical or horizontal
stripes.
When shooting dark or dim subjects.
When shooting subjects with excessive
backlighting.
When shooting scenes with movement in various
directions.
When shooting scenes with low-contrast back-
grounds.
• Switch off the Picture Stabilizer when recording
with the camcorder on a tripod.
• The "L_,," indicator appears blinking if the
Stabilizer cannot be used.
To Next Page
Loading...
