.............................................2 5
iii!i!i!!i!!!I
LIGHT OFF/AUTO/ON SwItch
DANGER
I The vide() light can become extremely
hot. Do not touch it either while in
operation or soon after turning it off,
otherwise serious injury may result.
I Do not place time camcorder into the
carrying case immediately after using the
vide() light, since it remains extremely
hot for some time.
I When opelating, keep a distance of
about 30 cm. (1 ft.) between the vide()
light and people or objects.
I DO Imot use near flammable or explosive
materials.
I It is recommended that you consult your
nearest/VC dealer for replacing the vide()
light.
EeATuRE:Video Light
PURPOSE:
1-o brighten the scene when natural lighting is too dim.
OPERATION:
1)Set the LIGHT OFF/AUTO/ON Switch as required:
OFF : lilrns off the light.
AUTO : Automatically turns on the light when time
cam(order senses insufficient lighting on the
subject.
ON : Always keeps the light on as k)ng as the
camcorder is turned on.
[] Time vide() light can only be used with the
camcorder's power on.
[] It is recommended to set the white balance
(L_ pg. 38)to ;_ when you use the vide() light.
[] When not using the vide() light, turn it ()fit() save
battery power.
NOTES:
• Even if the battery indicator (czz]) does not blink if
the battery pack's charge is low, the cam(order may
turn off automatically when you turn on the video
light, or when you start recording with the video light
turned on.
• When the HGHT OFF/AUTO/ON Switch is set to
"AUTO":
Depending on the lighting conditions, the video
light may keep turning on and off. In this case,
manually switch the light on or off using the
LIGHT OFF/AUTO/ON switch.
• While the "Sports" or "High Speed Shutter" mode
(_ pg. 2g) is engaged, the light is likely to stay on.
• While the "Twilight" mode (_" pg. 29) is engaged,
the light will not actiw_te.
To Next Page
Loading...
