Power Switch
SNAPSHOT
=
SNAPSHOT Button
V
Display
Snapshot
Use your camcorder like a regular camera and take a
snapshot, or several of them in succession.
SELECT OPERAT[ON MODE
Setthe Power Switch to "AUT(Y' or "PRO.".
TAKE SNAPSHOT
PressSNAPSHOT.
If you press during Record-Standby...
.... a still image will be recorded for approx. 6
seconds, then the camcorder re-enters the
Record-Standby mode.
If you press during Recording,..
.... a still image will be recorded for approx. 6
seconds, then the normal recording resumes.
NOTE:
After SNAPSHOT is pressed, there is ,_momentary camera
shutter-type blackout together with the sound effect of a
shutter closing, which is recorded together with the image.
4,
To Next Page
Loading...
