JVC GR-SXM915 - Page 44

oo •
Power Switch
-- PLAY/PAUSE (_/R)
Button
STOP (111)Button
--COUNTER R/M Button
FEATURE:Still Playback
PURPOSE:
To pause during playback.
OPERA TION:
1) Press PLAY/PAUSE (1_/||) during playback.
2) To resume normal playback, press PLAY/PAUSE
(l_/|i) again.
NOTE:
Noise bars appear and pictures may become
monochrome during Still Playback. This is normal.
FEATURE:Shut?[e Search
PURPOSE:
To allow high-speed search in either direction.
OPERA lION:
1) Press FF (1_-) to search forward or press REW (_)
to reverse during playback.
2) To resume normal playback, press PlAY/PAUSE
(P-/lm).
NOTES:
• During playback, press and hold REW (_) or
FF (_). The search continues as long as you hold
the button. Once you release it, normal playback
resumes.
• Noise bars appear and pictures may become
monochrome or darken during Shuttle Search. This
is normal.
FEATURE:Coun?er Memory Func?[on
PURPOSE:
To make it easier to locate a specific tape segment.
OPERA TION:
1) Press COUNTER R/M and hold for more than 1
second. The counter resets to "0:00:00".
2) Press COUNTER R/M for less than 1 second. "M"
appears.
3) After recording or p]ayback, press STOP (m), then
REW (_ql). Timetape automatically stops at or dose
to 0:00:00.
4) Press PLAY/PAUSE (1_/||) to start playback.
NOTES:
• The counter memory functions in the Fast-Forward
and Rewind modes.
• To disable the Counter Memory Function, press
COUNTER R/M for less than 7 second so that "M"
disappears.