4
In the same way, register [B] and [C].
After all three positions A, B and C are
registered, the positions of the [A], [B]
, and [C]
buttons will be rearranged according to the
order of the registered zoom position from the
left.
.
5
Exit the Register Preset Zoom mode.
Tap (click) the [Preset] button to exit the
Register Preset Zoom mode.
Memo :
0
After registration is complete (
[A], [B], and [C]
buttons are all active), tapping (clicking) each
button switches to the corresponding preset
zoom position.
0
This function operates independently of the
preset zoom position on the camera recorder.
(A P
50 [Saving/Recalling Current Zoom
Position (Preset Zoom)] )
0
When the dynamic zoom is on, the preset button
where the dynamic zoom position is registered
grays out when the dynamic zoom is off and the
zoom position cannot be changed.
0
When the dynamic zoom is off, the dynamic
zoom position cannot be registered.
Deleting a Preset Zoom
1
Set to the Delete Preset Zoom mode.
When any of positions [A], [B], and [C] are
registered, tapping (clicking) the [Clear
] button
switches to the Delete Preset Zoom mode.
.
2
Tap (click) the [A], [B], or [C] button that
corresponds to the position you want to
delete.
0
The position is deleted, and the button is
grayed out.
0
The corresponding zoom position mark on
the sliding bar also disappears.
.
Position mark
disappears
Grayed out
3
Exit the Delete Preset Zoom mode.
Tap (click) the [Clear] button to exit the Delete
Preset Zoom mode.
Memo :
0
The
Clip Review function of the camera recorder
is unavailable during View Remote operation.
(A P73 [Viewing Recorded Videos Immediately
(Clip Review)] )
160
View Remote Feature K
Connecting to the Network
K
To Next Page
Loading...
Need help?
General
