Why is the recording time shorter than expected on my JVC GY-HM250U?
If the actual recording time on your JVC Camcorder is shorter than the estimated time, be aware that the recordable time may be shorter depending on the shooting conditions or the subject.
How to fix a JVC Camcorder when the power does not turn on?
If your JVC Camcorder's power does not turn on, consider these potential solutions: * Ensure the AC adapter is properly connected. * Verify the battery is charged. * If the power was recently turned off, wait at least 5 seconds before attempting to turn it on again.
Why can't I connect my JVC Camcorder to wireless LAN?
If you cannot connect your JVC Camcorder to a wireless LAN, consider the following: * Check the connection mode and settings, specifically the [SSID] and [Passphrase] if not using WPS. * If the Passphrase is incorrect, re-enter it, even if a “Completed the Setup Wizard” message appears.
What to do if the camera image is not output on the LCD monitor and viewfinder screen of my JVC GY-HM250U?
If the camera image is not displaying on the LCD monitor and viewfinder screen of your JVC Camcorder, make sure the camera recorder is set to the Camera mode by using the [MODE] selection button.
What causes the View Remote screen issues on my JVC Camcorder?
If The View Remote screen turns black, flickers, freezes, or you cannot perform remote operation on your JVC Camcorder, the network path may be congested. Wait a while before refreshing (reloading) the web browser.
Why is the wireless LAN disconnected on my JVC Camcorder?
If the wireless LAN on your JVC Camcorder is disconnected, the following suggestions may help: * The wireless LAN may be disconnected depending on the environment. Try changing the usage environment. * Try connecting via wired LAN.
Why is there an incorrect display on the viewfinder of my JVC Camcorder?
If you're experiencing an incorrect display on the viewfinder of your JVC Camcorder, check if [LCD/VF] B [VF SW] is set to “Enable” and if the viewfinder is in use without being pulled out. To use the viewfinder in this setting, pull out the viewfinder.
How to fix JVC Camcorder SD card that cannot be initialized?
If the SD card of your JVC Camcorder cannot be initialized (formatted), ensure that the write-protect switch on the SD card is turned off.
Why does the wireless LAN disconnect on my JVC GY-HM250U?
If your JVC Camcorder's wireless LAN keeps disconnecting, consider these points: * The disconnection could be due to the environment; try changing your usage environment. * As an alternative, connect via a wired LAN.
What to do if my JVC GY-HM250U is unable to start recording?
If you're having trouble starting a recording on your JVC Camcorder, here's what to check: * Make sure the record trigger button/lock switch on the handle is turned on. * Ensure the write-protect switch on the SD card is off. * Verify the camera recorder is set to Camera mode using the [MODE] selection button. * Confirm the inserted SD card is compatible with the recording format.
General| Camera Type | Professional Camcorder |
|---|---|
| Effective Pixels | 12.4 MP |
| Filter Size | 72 mm |
| Built-In Microphone Type | Stereo |
| Audio | 2-channel |
| Display Type | LCD |
| Sensor Type | 1/2.3-inch CMOS |
| 35mm Equivalent Focal Length | 29.5 - 678 mm |
| Maximum Aperture | f/1.2 to 3.5 |
| Minimum Focusing Distance | 1.0 m |
| ND Filter | Built-in 1/4, 1/16, 1/64 |
| Recording Media | SD/SDHC/SDXC |
| Video Resolution | 1920 x 1080 |
| Recording Format | AVCHD, MP4 |
| Video Format | AVCHD |
| Audio Format | AAC |
| Display Size | 3.5" |
| Inputs | HDMI, USB, XLR |
| Outputs | HDMI, USB |
| Dimensions | 180 x 175 x 400 mm |
To Next Page
