JVC GY-HM250U - Connecting the Headphone

Connecting via SDI n m
0
Digital video signals, together with embedded
(superimposed) audio signals and time code
signals, are output for both the 3G-SDI/HD-SDI
and SD-SDI signals.
Memo :
0
The sampling frequency for embedded
(superimposed) audio signals is 48 kHz. Time
code of the built-in time generator as well as
playback time code are also output.
Setting the Aspect
0
For setting the mode to convert images with a
16:9
aspect
ratio
to display on a 4:3 aspect ratio
screen.
0
Set using [A/V Set] B [Video Set] B [SD
Aspect].
0
The available modes include “Letter”
(blackened at the top and bottom) and
“Squeeze”
(full size, compressed at the left and
right).
(A P118 [ SD Aspect ] )
Memo :
0
When [Record Format] B [System] is set to “SD”,
and [SD Aspect] is set to “4:3”, this item cannot be
selected.
(A P123 [ System ] )
(A P125 [ SD Aspect ] )
Connecting the
Headphone
0
Select the audio output from the [x] terminal
using [A/V Set
]
B [Monitor].
(A P120
[ Monitor ] )
.
Memo :
0
There
is
no
sound output from the speaker when
the headphone is connected.
Connecting External Monitor
153
Connecting External Devices