JVC GY-HM890U - User Manual

Questions and Answers

K
Kristina DaySep 23, 2025
Why does the View Remote screen turns black on my JVC GY-HM890U?
- M
  Mario ConleySep 23, 2025
  The network path is congested. Wait a while before refreshing (reloading) the web browser. The problem may be resolved by clearing the web browser cache.
M
Michael GonzalezAug 23, 2025
What to do if images on JVC GY-HM890U Camcorder LCD monitor and viewfinder screen appear dark or blurred?
- J
  James LindseyAug 25, 2025
  If the images on the LCD monitor and viewfinder screen appear dark or blurred, try these steps: Readjust the brightness of the LCD monitor and viewfinder. Check if the [ND FILTER] switch is set to “1/64”. Ensure the iris is not closed. Verify the shutter speed setting is not too high. Increase the amount of peaking using the [PEAKING +/-] button to adjust the contour for the LCD monitor and the viewfinder screen.
C
Cindy HernandezAug 25, 2025
What to do if JVC Camcorder is unable to start recording?
- A
  Angela TurnerAug 26, 2025
  If you are unable to start recording, check the following: Ensure the record trigger button/lock switch on the handle is turned on. Make sure the write-protect switch of the SD card is turned off. Verify the camera recorder is set to the Camera mode by pressing the [CAM/MEDIA] selection button.
M
Mark GreenAug 27, 2025
How to fix incorrect display on the viewfinder of JVC GY-HM890U Camcorder?
- G
  ginamooreAug 27, 2025
  If there is an incorrect display on the viewfinder, check if the LCD monitor is used with [LCD/VF] B [LCD + VF] set to “Off”.
T
tiffanydennisAug 27, 2025
Why is there no sound during JVC GY-HM890U Camcorder playback?
- R
  Robert RamirezAug 27, 2025
  There might be no sound during playback if the currently played clip was recorded in the Variable Frame Rec mode.
T
Tanya PierceSep 17, 2025
Why are the two JVC GY-HM890U recorders not synchronized even though the time codes have been synchronized?
- S
  sara20Sep 18, 2025
  If the two camera recorders are not synchronized even though the time codes have been synchronized, check if the [TC GENE.] switch is set to “FREE”. Also set [System] B [Record Set] B [Record Format] B [WFrame & Bit Rate] such that the two camera recorders have the same frame rate.
M
Marcus RichardsSep 14, 2025
Why is the actual recording time shorter than the estimated time on my JVC GY-HM890U Camcorder?
- C
  cathyshawSep 14, 2025
  The recordable time may be shorter depending on the shooting conditions or the subject.
A
Anthony WilsonSep 15, 2025
Why are the date and time not displayed on my JVC GY-HM890U Camcorder?
- K
  Kelli GarciaSep 16, 2025
  The date and time are only displayed on the Display 1 and Display 2 screens in the Camera mode (during shooting). Also, check if [System] B [Record Set] B [Time Stamp] is set to “On”. To display the date and time, set it to “Off”.
J
Joshua BallardSep 6, 2025
Why is [CH-3/CH-4] audio not recorded on JVC GY-HM890U Camcorder?
- M
  Miss Elizabeth DeanSep 6, 2025
  If [CH-3/CH-4] audio is not being recorded, ensure that the number of recording channels is set to “4ch”. Also, verify that [System] B [Record Set] B [Record Format] B [WFormat]/ [YFormat] is not set to “AVCHD”. Select a setting other than “AVCHD”.
S
sfreemanSep 3, 2025
How to fix JVC GY-HM890U Camcorder SD card that cannot be initialized (formatted)?
- J
  Jennifer SummersSep 3, 2025
  If the SD card cannot be initialized (formatted), make sure that the write-protect switch of the SD card is turned off.