Why does the View Remote screen turns black on my JVC GY-HM850U Camcorder?
The network path is congested. Wait a while before refreshing (reloading) the web browser. The problem may be resolved by clearing the web browser cache.
What to do if images on JVC GY-HM850U LCD monitor and viewfinder screen appear dark or blurred?
If the images on the LCD monitor and viewfinder screen appear dark or blurred, try these steps: Readjust the brightness of the LCD monitor and viewfinder. Check if the [ND FILTER] switch is set to “1/64”. Ensure the iris is not closed. Verify the shutter speed setting is not too high. Increase the amount of peaking using the [PEAKING +/-] button to adjust the contour for the LCD monitor and the viewfinder screen.
What to do if JVC GY-HM850U Camcorder is unable to start recording?
If you are unable to start recording, check the following: Ensure the record trigger button/lock switch on the handle is turned on. Make sure the write-protect switch of the SD card is turned off. Verify the camera recorder is set to the Camera mode by pressing the [CAM/MEDIA] selection button.
How to fix incorrect display on the viewfinder of JVC Camcorder?
If there is an incorrect display on the viewfinder, check if the LCD monitor is used with [LCD/VF] B [LCD + VF] set to “Off”.
Why is there no sound during JVC Camcorder playback?
There might be no sound during playback if the currently played clip was recorded in the Variable Frame Rec mode.
Why are the two JVC GY-HM850U recorders not synchronized even though the time codes have been synchronized?
If the two camera recorders are not synchronized even though the time codes have been synchronized, check if the [TC GENE.] switch is set to “FREE”. Also set [System] B [Record Set] B [Record Format] B [WFrame & Bit Rate] such that the two camera recorders have the same frame rate.
Why is the actual recording time shorter than the estimated time on my JVC GY-HM850U Camcorder?
The recordable time may be shorter depending on the shooting conditions or the subject.
Why are the date and time not displayed on my JVC GY-HM850U Camcorder?
The date and time are only displayed on the Display 1 and Display 2 screens in the Camera mode (during shooting). Also, check if [System] B [Record Set] B [Time Stamp] is set to “On”. To display the date and time, set it to “Off”.
Why is [CH-3/CH-4] audio not recorded on JVC Camcorder?
If [CH-3/CH-4] audio is not being recorded, ensure that the number of recording channels is set to “4ch”. Also, verify that [System] B [Record Set] B [Record Format] B [WFormat]/ [YFormat] is not set to “AVCHD”. Select a setting other than “AVCHD”.
How to fix JVC GY-HM850U SD card that cannot be initialized (formatted)?
If the SD card cannot be initialized (formatted), make sure that the write-protect switch of the SD card is turned off.
General| Video Resolution | 1920 x 1080 |
|---|---|
| Focus | Auto/Manual |
| Iris | Auto/Manual |
| ND Filter | 1/4, 1/16, 1/64 |
| Timecode | Yes |
| HDMI Output | Yes |
| Component Output | Yes |
| Composite Output | Yes |
| Sensor Type | 3x 1/3-inch CMOS |
| Effective Pixels | Approx. 2.07 megapixels (1920 x 1080) |
| Recording Format | AVCHD, MOV |
| Frame Rates | 24p |
| Lens Mount | 1/3" Bayonet Mount |
| Optical Zoom | 20x |
| Audio Format | Dolby Digital |
| Audio Recording | 2 Channels |
| Audio Input | XLR |
| Viewfinder | 0.45-inch LCD |
| LCD Monitor | 3.5" LCD 920K pixel |
| Memory Card Slots | 2 |
| Recording Media | SD/SDHC |
| Connectors | HDMI, USB, FireWire, XLR |
| USB | Yes |
| FireWire | Yes |
| Battery Type | BN-VF815 (included) |
| Type | Shoulder-Mount |
To Next Page
