JVC GY-HM850U - Deleting Connection Settings; Performing Live Streaming

Deleting Connection Settings
1
Select [Main Menu] B [System] B
[Network]/[Settings] B [Connection Setup]
and press the Set button (R).
2
Select [Delete] and press the Set button
(R).
.
2
Delete
Store
Load
Wizard
Connection Setup
3
Select the file to delete using the cross-
shaped button (JK), and press the Set
button (R).
.
3
CAM3
CAM2
CAM1
Delete Connection Setup
4
Select [Delete] on the confirmation screen,
and press the Set button (R).
Deletion starts, and “Deleting...” appears on the
screen.
.
:TOKYO
4
Cancel
Delete
CAM1
Setup?
Delete Connection
5
Deletion is complete.
After file deletion is complete, “Complete”
appears on the screen.
Performing Live
Streaming
By combining with a decoder device or PC
application that support live streaming, you can
perform audio and video streaming via the network.
Supported Formats
Video
H.264
0
1920x1080/60i (8.0 Mpbs), 60i (5.0 Mpbs),
60i (2.5 Mbps), 50i (8.0 Mpbs), 50i (5.0 Mpbs),
50i (2.5 Mbps)
0
1280x720/30p (5.0 Mpbs), 30p (3.0 Mpbs),
30p (1.5 Mbps), 25p (5.0 Mpbs),
25p (3.0 Mpbs), 25p (1.5 Mbps)
0
720x480/60i (5.0 Mpbs), 60i (3.0 Mpbs),
60i (1.5 Mbps), 60i (0.8 Mbps), 60i (0.3 Mbps),
60i (0.2 Mbps)
0
720x576/50i (5.0 Mpbs), 50i (3.0 Mpbs),
50i (1.5 Mbps), 50i (0.8 Mbps), 50i (0.3 Mbps),
50i (0.2 Mbps)
0
480x270/30p (0.2 Mbps), 25p (0.2 Mbps)
Memo :
0
The following constraints apply depending on
the setting of [Main Menu] B [System] B
[Network]/[Settings] B [Live Streaming Set] B
[Type].
0
An encoding bit rate exceeding 5.0 Mbps
cannot be selected in the case of “RTSP/
RTP”.
0
An encoding bit rate exceeding 3.0 Mbps
cannot be selected in the case of “ZIXI”.
(A P139 [ Type ] )
Audio
AAC
Supported Protocols
Network protocols : TCP, UDP
Transport mode : MPEG2-TS,
RTSP/RTP, ZIXI
Managing the Network Connection Settings File
199
Connecting to the Network