Audio Output during
Recording
0
You can check the recorded audio from the
monitor speaker or the earphone connected to
the [PHONES] terminal.
(A P163 [Connecting a Earphone] )
0
Adjust the volume of the monitor speaker or
earphone using the [MONITOR] adjustment
knob.
.
Memo :
0
The warning tone will not be output during
recording.
0
Note that raising the volume of the monitor
excessively may cause howling with the camera
mic.
Time Code and User’s Bit
Time code and user’s bit data are recorded with the
video in this camera recorder.
The time code and user’s bit are displayed on the
viewfinder and LCD monitor during playback or
recording. (Display screen)
Displaying Time Code and User’s Bit
The time code and user’s bit are displayed on the
viewfinder and LCD monitor during playback or
recording.
The display differs according to the menu settings.
1
Set [Main Menu]
B
[LCD/VF]
B
[Display
Settings]
B
[TC/UB] to “On”.
(A P123 [ TC/UB ] )
When “TC” or “UB” is selected, time code or
user’s bit data is displayed respectively on the
display screen.
.
P13000K
1/100
F1. 6
0
dB
AE+6
ND 1/64
12 :34 :56
Jan 24 , 2014
00: 00:00.00
5 . 6 f t
00:00:00.00
FF EE DD 20
2
Select the display using the [TC DISPLAY]
switch on the LCD monitor.
Select time code display ([TC]) or user’s bit
display ([UB]).
.
Memo :
0
Values recorded on the SD card is displayed in
Media mode.
72
Audio Output during Recording
Shooting
To Next Page
Loading...
Need help?
General
