Why does my JVC Camcorder say 'LENS NOT CLOSED'?
- NNorma Brooks MDAug 1, 2025
The 'LENS NOT CLOSED?' error on your JVC Camcorder indicates that the lens does not close for detection. This issue arises because no result is stored in the EEPROM.
Why does my JVC Camcorder say 'LENS NOT CLOSED'?
The 'LENS NOT CLOSED?' error on your JVC Camcorder indicates that the lens does not close for detection. This issue arises because no result is stored in the EEPROM.
Sensor type | CCD |
---|---|
Total megapixels | - MP |
Optical sensor size | 1/3 \ |
Digital zoom | - x |
Optical zoom | 14 x |
Image stabilizer | No |
Focal length range | 4.4 - 61.6 mm |
Interchangeable lens | Yes |
Focal length (35mm film equivalent) | 32 - 448 mm |
Camcorder media type | Memory card |
Compatible memory cards | SDHC |
Internal storage capacity | - GB |
Built-in flash | - |
Display diagonal | 4.3 \ |
Display resolution | 800 x 480 pixels |
Display resolution (numeric) | 410000 pixels |
Viewfinder resolution | 1226000 pixels |
Viewfinder screen size | 0.45 \ |
Camcorder type | Shoulder camcorder |
Product color | Black |
Video resolutions | 1280 x 720, 1440 x 1080, 1920 x 1080 pixels |
Supported video modes | 1080i, 576i, 720p |
Video formats supported | MPEG2 |
Maximum video resolution | 1920 x 1080 pixels |
Bitrate at maximum video resolution | 35 Mbit/s |
Maximum image resolution | - pixels |
Headphone connectivity | 3.5 mm |
USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
Component video (YPbPr/YCbCr) out | 1 |
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 0 |
Battery capacity | - mAh |
Battery life (max) | - h |
Storage temperature (T-T) | -20 - 60 °C |
Operating temperature (T-T) | 0 - 40 °C |
Storage relative humidity (H-H) | 0 - 85 % |
Operating relative humidity (H-H) | 30 - 80 % |
Weight | 3.7 g |
---|
Essential safety measures to be followed during servicing to maintain product compliance and prevent hazards.
Specific cautions for handling parts, wiring, and components to ensure safety and proper repair.
Post-service tests including insulation, dielectric strength, clearance, and leakage current checks.
Overview of servicing procedures and general cautions before starting work.
Step-by-step guide for removing outer covers and assemblies, including screw identification.
Detailed instructions for removing main circuit boards like AUDIO, CAM, SDI, and CODEC boards.
Procedure for disassembling and removing the camera's handle component.
Steps for disassembling and removing the viewfinder unit, including lens and VF boards.
Lists necessary instruments, special implements, and setup for performing adjustments.
Diagram illustrating the standard equipment setup for calibration and adjustment.
Comprehensive list of adjustable parameters with their modes, ranges, and display order.
Specific adjustment procedures for encoder, cam, flare, and black levels.
Procedure to correct horizontal and vertical white blemish issues using specific adjustment menus.
Explanation of service menu hierarchy and operation for firmware, version check, and advanced functions.
Details EEP-ROM contents, purpose, and data reset behavior upon board replacement.
Step-by-step guide for updating the camera's firmware using an SD memory card.
Guidelines for firmware version updates and adjustments required after replacing boards.