File Backup (Windows)
Preparation:
0
Install the Everio MediaBrowser software
onto the computer.
0
Make sure that enough space is left in the
HDD of computer.
0
Close the LCD monitor to turn off the
camera. Disconnect the power supply.
1
Open the LCD monitor to connect to
the computer with the USB cable.
.
To AC Outlet
(110 V to 240 V)
AC Adapter
USB Cable
(Provided)
To DC
Connector
To USB
Connector
To USB Connector
0
Reconnect the power supply to turn on
the camera.
o
On the camera:
2
Tap [CONNECT TO PC] on the
camera’s touch screen.
3
Tap [BACK UP] on the camera’s
touch screen.
.
0
Everio MediaBrowser starts on the
computer.
o
On the computer:
4
Select files to backup.
.
5
Start backup.
.
Click
Saving destination (PC)
NOTE
0
File backup is only supported by
the provided software.
View Your Video (Windows)
0
To view video that is still on your camera, click on Device>Camcorder
in the left side panel of Everio MediaBrowser.
0
To view video that has already been archived to the computer, click
on Library>Calendar and then choose the date the video was
recorded.
NOTE
0
Choose Settings/Preferences to see the folder where
MediaBrowser stores your videos. You can also play back
your videos from this folder in most popular media players.
14
To Next Page
Loading...
Need help?
General