12
Be sure to confi gure the following three
settings before use.
Charging the Battery Pack
1 Set the power/mode switch to OFF.
Slide while pressing down the lock button.
MODE
OFF
(CHARGE)
ON
2 Attach the battery pack.
Slide the battery pack down until it locks
in place.
3 Connect the AC adapter.
•
You can also connect the AC adapter using
the Everio dock connector. ( pg. 6)
•
The access/charge lamp blinks to indicate
charging has started.
•
When the lamp goes out, charging is
fi nished. Unplug the power cord from the AC
outlet and disconnect the AC adapter from
the camera.
Necessary Settings before Use
MENU
Access/Charge
Lamp
Power/Mode
Switch
Set Lever
Bottom of the Camera
BATT.
Required charging / recording time (approx.)
The values within ( ) are the times when the LED light is on.
Battery pack Charging time
Recording time
GZ-MG275 GZ-MG145/135
BN-VF808U
(Provided)
1 hr. 30 min. 1 hr. 15 min.
1 hr. 35 min.
(1 hr. 30 min.)
BN-VF815U 2 hr. 40 min. 2 hr. 35 min.
3 hr. 15 min.
(3 hr. 5 min.)
BN-VF823U 3 hr. 50 min. 3 hr. 50 min.
4 hr. 55 min.
(4 hr. 35 min.)
DC Connector
AC Adapter
To AC Outlet
(110V to 240V)
Open the cover.
Power
Cord
To Next Page
Loading...
