29
ENGLISH
Preparation:
•
Make sure that [ANALOG INPUT] is set to [OFF]. (Factory-preset = [OFF]) ( pg. 49)
•
Turn off all units.
NOTES
•
You can also connect the cables using the Everio dock connectors. The S-Video cable (optional)
enables even higher quality playback.
( pg. 6) When other devices such as a DVD burner are
connected to the Everio dock, switch off these devices power.
•
This camera is designed to be used with PAL-type colour television signals. It cannot be used with a
television of a different standard.
1 Turn on the camera and the TV.
2 Set the TV to its VIDEO mode.
3 (Only when connecting the camera to the VCR/DVD recorder)
Turn on the VCR/DVD recorder, and set the VCR/DVD recorder to its AUX input
mode.
4 Start playback on the camera. ( pg. 24, 25)
16:9 TV 4:3 TV
8 If the aspect ratio of the image is not correct
as shown right
Change the settings in [SELECT TV TYPE].
( pg. 49)
8 To display camera’s on-screen display on TV
Set [DISPLAY ON TV] to [ON]. ( pg. 49)
Watching Images on TV
AV Input Connector
AV Cable
AV Connector
DC Connector
AC Adapter
To AC Outlet
To Next Page
Loading...
