JVC HR-D210E - Page 3

[
7
FEATURES
|
High-quality pictures
e
HQ
(High
Quality)
System
technologies
with
a
Detail
Enhancer,
and
20
%
higher
white
clip
level.
Advanced tape access features
e VHS Index Search System facilitates location of the beginning of each recording by automatically
marking an index code on the control track of the tape; index codes can be detected in the Shuttle
Search mode. This system is based on the newly standardised CTL coding system for VHS.
® Counter search for returning to a designated point on a tape.
Convenient automatic functions
e Auto play function: insert a cassette (with safety tab removed), and playback will start automatically.
e
Next-function
memory
allows
a
command
to
be
entered
immediately
after
pressing
REW
(or
FF},
with
the
second
command
‘‘remembered’’
and
performed
automatically
after
the
tape
rewinds
to
its
begin-
ning
or fast-forwards
to
the
counter
reading
of
‘‘0000".
— Memory play: for automatic start of playback.
— Memory eject: to eject the cassette after rewind, without waiting for completion of rewind.
— Memory timer standby: to engage the timer recording standby mode after rewind.
— Memory power-off: to turn the power off after rewind.
Automatic backspace editing.
Auto-power-on convenience.
Power-off ejection.
Automatic rewind at the end of tape.
Other value features
@ Voltage synthesized tuner with 32-channel preset capacity.
14-Day/4-event programmable timer.
Overlapped programme warning: programme numbers on the FDP blink when the preset time spans of
the programmes overlap.
Timer programme review to show the preset programme contents in the order of execution.
Infrared remote control.
On-screen record-pause mode display with elapsed time indicated by shrinking white bar.
Electronic tracking controls.
Instant timer recording function using the REC/ITR button.
Shuttle Search with latch function: with the Shuttle Search button locked or hetd depressed, offers
high-speed playback at 9 times normal speed in either direction.
Still and frame advance.
Comprehensive fluorescent display.
Elapsed recording time indicator.
[
PRECAUTIONS
|
Handling and storage
Avoid using the recorder under the following conditions:
— extremely hot, cold or humid places,
— dusty places,
— near appliances generating strong magnetic fields,
— places subject to vibrations, and
— poorly ventilated places.
Be careful of moisture condensation.
Avoid using the recorder immediately after moving from a
cold place to a warm place. The water vapour in warm
air will condense on the still-cold video head drum and
tape guides and may cause damage to the tape and the
recorder.
Handle the recorder carefully.
e Do not block the ventilation openings.
¢ Do not place anything heavy on the recorder.
« Do not place anything which might spill and cause
trouble on the top cover of the recorder.
e Use in horizontal (fiat) position only.
In case of transportation,
e Avoid violent shocks to the recorder during packing and
transportation,
e Before packing, be sure to remove the cassette from the
recorder,
Video cassettes
@ This recorder employs VHS-type cassettes only.
E-240 for 4 hours, E-180 for 3 hours, E-120 for 2 hours,
E-90 for 1 hour and 30 minutes, E-60 for 1 hour and E-30
for 30 minutes of recording.
Video cassettes are equipped with a safety tab to prevent
accidental erasure. When the tab is removed, recording can-
not be performed. If you wish to record on a cassette
whose tab has already been removed, use adhesive tape t
block the hole.
Safety tab
Avoid exposing the cassettes to direct sunlight. Keep them
away from heaters.
Avoid extreme humidity, violent vibrations or shocks,
strong magnetic fields {near a motor, transformer or mag-
net) and dusty places.
@ Place the cassettes in cassette cases and position vertically.
Moisture condensation
If you pour a cold liquid into a glass, water vapour in the
air will condense on the surface of the glass. This is called
moisture condensation.
Moisture condensation on the head drum, one of the most
crucial parts of the video recorder, will cause damage to the
tape.
Moisture condensation is apt to occur under the following
conditions:
— when the recorder is moved from a cold place to a warm
piace, and
— under extremely humid conditions.
In conditions where moisture condensation may occur,
keep the power cord plugged in an AC outlet and the
OPERATE switch set to ON; this would help prevent con-
densation from occurring. When condensation has occurred,
it will not evaporate quickly once the power is switched on.
Wait a few hours for the recorder to become dry.
Operation
When a cassette is loaded, the power is switched on auto-
matically.
The cassette can be unloaded even when the power is off.
Pressing the EJECT button turns the power on and, after
ejection of the cassette, shuts it off automatically in this
Case.
As long as the TIMER button is engaged with the TIMER
indicator lit, the OPERATE and EJECT buttons have no
effect and unloading of a cassette is not possible. If a
cassette has not yet been inserted, simply insert a cassette ;
the power will be switched on to load the cassette properly
and, after completion of automatic loading, the Timer
Recording Standby mode wil! be engaged with power off.
Remote control unit
Avoid violent shocks, especially take care not to drop the
unit.
Take care not to allow liquid to spill into the unit.
Do not place heavy objects on the unit.
Avoid leaving the unit in places subject to direct sunlight or
extremely high temperatures.
WARNING: it may be unlawful to record or play back
copyright material without the consent of the copyright
owner.