JVC HR-J4005UM - Auto Channel Set

EN 7
AUTO CHANNEL SET
SCANNING...
PRESS (MENU) TO END
START AUTO CHANNEL
SET
6
Press MENU.
● Receivable channels in
your area are automati-
cally assigned to the
CH
5
∞ buttons, and non-
receivable channels are
skipped.
● If the tuner channels have
been set properly "SCAN
COMPLETED" will be displayed on the screen. If "NO
SIGNAL" is displayed on the screen, make sure that the
antenna cable is connected to the VCR properly and
press OK or PUSH JOG . The VCR will try Auto
Channel Set again.
RETURN TO NORMAL
SCREEN
7
Press MENU.
%
12 3
45
0
6
78 9
•• ••
1
2
4
3
MENU
MENU
OK
PUSH JOG
OK
CH
CH