EasyManua.ls Logo

JVC HR-J4005UM User Manual

JVC HR-J4005UM
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
2 EN
Dear Customer,
Thank you for purchasing the JVC VHS video cassette recorder. Before use, please read the safety information and precautions
contained on this page to ensure safe use of your new VCR.
CAUTIONS
WARNING: DANGEROUS VOLTAGE INSIDE
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
The POWER button does not completely shut off mains
power from the unit, but switches operating current on and off.
" " shows electrical power standby and " " shows ON.
n Cassettes marked "VHS" (or "S-VHS") can be used with this
video cassette recorder. However, only "VHS" recordings can
be played back in this model.
n This model is equipped with SQPB (S-VHS QUASI PLAY-
BACK) that makes it possible to play back S-VHS recordings
with regular VHS resolution.
n HQ VHS is compatible with existing VHS equipment.
Warning on lithium battery
The battery used in this device may present a fire or
chemical burn hazard if mistreated. Do not recharge,
disassemble, heat above 100°C or incinerate.
Replace battery with Panasonic (Matsushita Electric),
Sanyo, Sony or Maxell CR2025; use of another battery may
present a risk of fire or explosion.
n Dispose of used battery promptly.
n Keep away from children.
n Do not disassemble and do not dispose of in fire.
HOW TO USE THIS INSTRUCTION
MANUAL
All major sections and subsections are listed in the Table
Of Contents on page 3. Use this when searching for
information on a specific procedure or feature.
The Index on pages 34 – 36 lists frequently-used terms,
and the number of the first page on which they are used
or explained in the manual. This section also illustrates
the controls and connections on the front and rear panel,
the front display panel and the remote control.
The Z mark signals a reference to another page for
instructions or related information.
Operation buttons necessary for the various procedures
are clearly indicated through the use of illustrations at
the beginning of each major section.
BEFORE YOU INSTALL YOUR NEW
VCR . . .
. . . please read thoroughly the cautions on this page.
This unit is produced to comply with Standard IEC Publ. 65.
POWER SYSTEM:
This set operates on voltage of AC 110 – 220V`, 50/60 Hz
with automatic switching.
Use the conversion plug (provided) depending on the type
of your AC WALL outlet.
The rating plate and safety caution are on the rear of the
unit.
IMPORTANT:
It may be unlawful to record or play back copyrighted
material without the consent of the copyright owner.
CAUTION
n When you are not using the VCR for a long period of
time, it is recommended that you disconnect the power
cord from the AC outlet.
n Dangerous voltage inside. Refer internal servicing to
qualified service personnel. To prevent electric shock or fire
hazard, remove the power cord from the AC outlet prior to
connecting or disconnecting any signal lead or aerial.
n Changes or modifications not approved by JVC could
void user's authority to operate the equipment.
Question and Answer IconNeed help?

Do you have a question about the JVC HR-J4005UM and is the answer not in the manual?

JVC HR-J4005UM Specifications

General IconGeneral
BrandJVC
ModelHR-J4005UM
CategoryVCR
LanguageEnglish

Summary

CAUTIONS

Electrical Safety Precautions

Warnings about internal voltage, rain, moisture, and proper servicing.

Lithium Battery Safety

Handling, Disposal, and Warnings

Precautions for handling, recharging, and disposing of lithium batteries.

INSTALLING YOUR NEW VCR

Basic Connections Setup

Connecting the VCR to power and other devices.

Connecting VCR to TV

Methods for connecting the VCR to a television using RF or AV cables.

Lithium Battery Installation

Steps for installing and removing the VCR's internal lithium battery.

Connecting to Power Source

Steps for plugging the VCR into an AC power outlet.

INITIAL SETTINGS

Plug & Play Setup Procedure

Step-by-step guide for the automatic installation process.

INITIAL SETTINGS (cont.)

Auto Channel Set

Steps to automatically scan and set receivable TV channels.

Setting Receivable Channels

Steps for performing an automatic channel scan.

INITIAL SETTINGS (cont.)

Clock Setting Procedure

Step-by-step guide for setting the clock time, date, and year.

SIMPLE PLAYBACK AND RECORDING

Simple Playback Operation

Basic steps for playing a cassette.

Simple Recording Operation

Basic steps for recording a program onto a cassette.

PLAYBACK AND RECORDING FEATURES

PLAYBACK AND RECORDING FEATURES (cont.)

PLAYBACK AND RECORDING FEATURES (cont.)

B.E.S.T. Picture System Setup

Configuring the B.E.S.T. system for optimal picture quality.

Recording

Starting Recording

How to initiate the recording process.

Playback

Starting Playback

How to begin playing a cassette.

Recording Features

TIMER RECORDING

Express Timer Programming

Setting up timed recordings for shows.

TIMER RECORDING (cont.)

Check, Cancel And Revise Programs

Managing programmed timer recordings.

Instant Timer Recording (ITR)

Quick recording method for a set duration.

TIMER RECORDING (cont.)

EDITING

EDITING (cont.)

TROUBLESHOOTING

Power Issues

Common problems and solutions related to the VCR's power.

Tape Transport Problems

Troubleshooting issues with cassette loading and ejection.

Playback Issues

Solutions for problems like no picture, noise, or audio issues during playback.

Recording Issues

Troubleshooting problems that prevent recording.

TROUBLESHOOTING (cont.)

Timer Recording Problems

Solutions for issues with timer programming and recording.

QUESTIONS AND ANSWERS

SPECIFICATIONS

Safety Precautions

Important warnings for VCR operation and handling.

Related product manuals