6 EN
INITIAL SETTINGS
Plug & Play
The Plug & Play function simplifies installation by guiding you
through the procedures of setting the language, clock and tuner
channels — simply follow the on-screen menus that appear
when the POWER button is first pressed to power on the VCR
after you connect the power plug to an AC outlet.
Before starting...
● Connect the TV antenna cable to the ANT. IN jack on the
VCR and plug the power cord into the AC outlet.
● Turn on the TV and select the VCR channel 3 or 4 (or AV
mode).
PERFORM PLUG & PLAY
SETUP
1
Press POWER.
● The Language Select screen appears.
SELECT LANGUAGE
2
Press CH
5
∞ or PUSH
JOG
%
fi to move the
highlight bar (arrow) to
your desired language
(ENGLISH or ESPAÑOL),
then press OK or PUSH
JOG .
● The Clock Set screen
appears.
SET TIME
3
Press CH5
∞
or PUSH
JOG%
fi
to set the hour,
then press OK or PUSH
JOG .
● Press and hold either
button to delay or
advance the time by 30
minutes.
SET DATE
4
Press CH
5
∞ or PUSH JOG
%
fi to set the date, then
press OK or PUSH JOG .
● Press and hold either button to change the date by 15
days.
SET YEAR
5
Press CH5
∞
or PUSH JOG%
fi
to set the year.
%
IMPORTANT
● Don't press any buttons on the VCR or remote that are
not directly related to the step you are performing while
Plug & Play is in progress.
● If you perform Plug & Play successfully during
installation, there's no need to separately perform the
Language Select, Clock Set or Channel Set procedures,
but if adjustments become necessary they can be
performed as follows:
– To change the selected language Z pg. 8
– To reset or adjust the time Z pg. 9
– To add/delete channels manually Z pg. 11
– To reset the tuner after moving to a different location
Z pg. 10
%
%
12 3
45
0
6
78 9
•• ••
1
2
4
3
POWER
MENU
To Next Page
Loading...
Need help?
General
