Page 4 April 4, 2002 3:07 pm
— 4 —
Remote
* VPS/PDC is not currently available in South America and not
possible with this VCR.
On-screen display
If you press OK on the Remote when “SUPERIMPOSE” is set to
“ON”(
墌
pg. 12), you can see the current VCR status on the TV
screen. To clear the time counter, press OK again.
The indications are not recorded even if the VCR is in the
recording mode.
A Channel and auxiliary input
B Day and clock time
C STEREO program indication
D SAP indication
E Audio monitor indications
F Time counter
G Tape Remaining Time
H Index number
I Tape position
J Cassette mark
K Tape speed
L VCR operation mode
M Timer warning display
To recall an indication
Number keys
A Press OK.
● All indications corresponding to the current status are
displayed for 5 seconds. After that, the counter
information and RECORD/PAUSE if in the Record Pause
mode, are left displayed on the screen.
B Press OK again to clear the display.
● The RECORD/PAUSE indication is left displayed on the
screen.
B
+++ E
CH125 RECORD
THU 12:00 AM PAUSE
STEREO –WARNING– SP
SAP TIMER RECORDING
TO START SOON
(CANCEL)
INDEX 1
NORM REMAIN 1:00
HI-FI COUNT –1:23:45
A
M
– Buttons, Connectors and Indicators –
+5-80(1IP3DJH7KXUVGD\$SULO30
To Next Page
Loading...
Need help?
General
